Bathroom Glass Partition Price Per Sq Ft in Gurugram & Noida (2026)

A bathroom glass partition price in Gurugram & Noida starts at ₹370 per sq ft for a fixed shower screen. At the top end, a slim-profile corner enclosure starts at ₹1,100 per sq ft. Most homes choose a frameless partition with a hinged door, from ₹500 per sq ft.

For example, a 5 ft wide bathroom with a 7 ft-high hinged partition has around 35 sq ft of glass, so the rough starting budget is ₹17,500. The final figure comes from the measurements we take at the site visit.

• Lowest cost: a fixed shower screen with no door, from ₹370 per sq ft.
• Most popular: a frameless partition with a hinged door, from ₹500 per sq ft.
• Small bathroom: a frameless sliding partition, from ₹550 per sq ft, because nothing swings out.
• Framed look: slim-profile styles start at ₹1,100 per sq ft and cost more for the aluminium profiles and finish.
• All our bathroom partitions use toughened glass; the thickness and fittings depend on the style.

Bathroom glass partition price by style

The rates below are starting rates per sq ft for the bathroom glass partition styles on our service pages. They include the agreed glass, fittings, sealing and installation scope; the exact quotation follows the site measurement.

How to estimate your bathroom glass partition price

Bathroom partition rates are quoted per sq ft. Use this formula for a rough budget:

Rough cost = width (ft) × height (ft) × rate per sq ft

The examples below assume glass 7 ft tall and are illustrative only. A corner enclosure uses two runs of glass, so add the widths together.

Your actual figure comes from the measurements we take at the site visit. After that, you get a quotation that is all-inclusive for the agreed scope of work. The ₹99 visit fee is adjusted against your final bill if you go ahead.

What changes the final bathroom glass partition price

1. Door type

A fixed panel costs least, a hinged door sits in the middle, and a sliding or slim-profile style costs more because it adds track fittings or aluminium profiles. The right choice depends on the room as much as the rate.

2. Size and layout

Wider or taller glass means more square feet. A corner enclosure also uses two panels, so it covers more area than a straight partition across the same shower.

3. Frame or no frame

A slim-profile frame adds to the cost over a frameless version of the same layout. It gives a distinct black-framed look and can cover small irregularities in older walls.

4. Walls, floor and access

Older flats in Gurugram and Noida can have walls that are slightly out of line. The site visit checks the walls and floor, the route for bringing material in, and the opening before the glass is ordered.

5. Finish and special glass

Frosted, tinted or patterned glass and coloured hardware are not on our standard rate card. Ask us on WhatsApp if you need a special finish so it can be included in the written quote.

Is 10mm glass the right thickness for a shower partition?

We use 8mm and 10mm toughened glass for bathroom work, depending on the style. Toughened glass is heat-treated and considerably stronger than ordinary glass; if it breaks, it crumbles into small blunt pieces rather than long sharp shards. You can read more about the material in this guide to tempered glass.

A fixed panel can use 8mm glass where the specification allows it. Hinged doors and sliders take repeated movement and flex, which is why our door and slider styles use 10mm toughened glass.

Is a glass partition good for a bathroom?

For most bathrooms, yes. A well-sealed glass partition keeps water in the shower area, is easier to clean than a curtain, lets light through and makes a small room feel more open.

• Water spots are the main trade-off. Hard water leaves marks, so a quick squeegee after each shower helps keep the glass clear.
• The upfront cost is higher than a shower curtain, but the partition is a permanent fitted solution.
• A hinged door needs room to swing. If the bathroom is tight, a sliding partition avoids that issue.

How to compare bathroom glass partition quotes

Two quotes can look far apart and still describe different jobs. Before comparing, ask every supplier:

1. What thickness is the glass, is it toughened, and which brand is being used?
2. What grade are the fittings? SS304 is designed to resist rust in a wet room.
3. Is installation included, or charged separately?
4. What does the warranty cover, and for how long?

A bathroom glass partition price that looks cheap can cover the glass alone, with hardware, sealing and fitting added later. FabWise gives you an all-inclusive written quotation for the agreed scope.

What your bathroom glass partition price includes

• 8mm or 10mm Saint-Gobain toughened glass, according to the selected style.
• SS304 anti-rust fittings. Sliding styles use SS304 and aluminium fittings for the track.
• A 1-year functional warranty on hardware for styles with a door. The fixed screen has no moving hardware, so its warranty does not cover glass.
• Measurement, fabrication and installation managed by the FabWise team.

From booking to installation

1. Book a ₹99 site visit. The fee is non-refundable, but it is adjusted against your final bill if you proceed.
2. We generally visit within 24–48 hours and take the measurements.
3. You receive an exact quotation within about 2 hours of the visit. It is valid for 3 days.
4. You pay 50% in advance and fabrication begins.
5. Production of toughened glass generally takes around 7–10 days. We then confirm the installation date.
6. You pay the remaining 50% once the job is complete.