Site visit within 24–48 hours in Delhi NCRHow it works

Faridabad · Haryana

Glass & Metal Fabrication in Faridabad

FabWise does glass and metal fabrication across Faridabad: shower cubicles, office cabins, shop fronts, gates and grills, railings, terrace sheds, windows and ACP. A ₹99 site visit, usually within 24 to 48 hours, gets the site measured and a written all-inclusive quote, aimed within about 2 hours.

Updated Faridabad

Painted mild steel main gate in front of an independent house in a plotted sector

Glass and metal fabrication in Faridabad is shaped by the city's unusual history. It began as a planned refugee township after Partition, grew into one of Haryana's biggest industrial towns along Mathura Road, filled in with HUDA sectors of plotted houses, and is now adding towers across the canal in Greater Faridabad. A gate for a kothi in Sector 15, a shutter for a shop in NIT 1, a shower cubicle for a new flat in Sector 81 and a mezzanine in a Sector 24 factory are four different jobs with four different sets of problems.

Faridabad is part of our core Delhi NCR service, on the same terms as Gurgaon and Noida. One team handles the site visit, measurement, written quotation, fabrication and installation. The visit costs ₹99, paid upfront and adjusted against the final bill if you go ahead, and the quotation is free, all-inclusive for the agreed scope and valid for 3 days.

How Faridabad divides up for fabrication work

The quickest way to understand a Faridabad site is to ask how old it is and which side of the canal it sits on. The older town and NIT are dense and built over decades; the HUDA sectors are plotted and mostly owner-built; Neharpar is new high-rise and builder-floor stock; the industrial sectors are sheds and factory blocks.

Faridabad zones and the fabrication work typical of each
ZoneWhat is built thereWork that comes up most
NIT and Old FaridabadDense family houses with shops below, busy marketsWindow grills, safety doors, rolling shutters, shop fronts
HUDA sectors 14 to 21, Sainik ColonyBungalows, kothis and builder floors on plotsMain gates, sliding gates, terrace sheds, railings, bathroom glass
Mathura Road (Sectors 28 to 37)Showrooms, malls, offices, warehouses beside NH-19Shop fronts, ACP, office cabins, shutters, mezzanines
Surajkund and CharmwoodTownships, villas and apartments near the AravallisPergolas, glass canopies, slide-and-fold doors, mesh
Greater Faridabad (Sectors 75 to 89)New towers and floors across the Agra canalFirst fit-out shower cubicles, uPVC windows, mosquito mesh
Industrial sectors and BallabgarhFactories, sheds, an older town and newer sectorsMezzanine floors, sheds, sliding gates, grills

NIT and Old Faridabad

NIT Faridabad, the New Industrial Township, is where the modern city started, and its numbered blocks are still among its busiest. Houses have grown floor by floor, lanes are narrow and the ground floor is often a shop. Old Faridabad is the original town by the railway station and the Old Faridabad metro station. Both need security metalwork and shop fittings more than anything else, and long panels have to be planned around tight access.

The HUDA sectors along Mathura Road

Sectors 14 to 17 are the city's established plotted sectors, with large houses and wide roads. Sector 21 and Badkhal mix kothis with builder floors, and Sainik Colony in Sector 49 is a plotted colony at the foot of the Aravallis. These are owner-run houses, so the jobs are the ones an owner decides on: a new gate, a terrace shed, a staircase railing, a bathroom redone with a glass partition.

Mathura Road, Surajkund and the industrial sectors

The Mathura Road corridor runs beside the Violet Line through Sectors 28 to 37 and carries the city's showrooms, malls and commercial blocks. Towards Delhi, Surajkund and Charmwood Village are greener, lower and villa-heavy. The industrial sectors, including Sector 24 and Sectors 58 and 59, need heavier steel: mezzanines, sheds and gates sized for trucks.

Ballabgarh and Greater Faridabad

Ballabgarh is a town older than Faridabad itself, now the southern end of the metro. Across the canal, Greater Faridabad, also called Neharpar, is the newest part of the city, where most work is the first fit-out of a recently handed-over flat.

All eight kinds of work, in Faridabad

Each family has its own Faridabad page covering what drives the price, timing and the questions people ask first.

  • [Shower cubicles and bathroom glass in Faridabad](/locations/faridabad/shower-cubicles): Saint-Gobain 10mm toughened glass with SS304 fittings. A frameless sliding shower partition starts at ₹550 per sq ft.
  • [Glass office partitions in Faridabad](/locations/faridabad/glass-office-partitions): cabins, conference rooms and showroom fronts in 12mm toughened glass, from ₹350 per sq ft for a fixed frameless partition.
  • [Glass repair in Faridabad](/locations/faridabad/glass-repairs): broken panels, floor springs and hinges, quoted from a WhatsApp photo or video with no paid visit.
  • [Metal fabrication in Faridabad](/locations/faridabad/metal-fabrication): MS main gates, sliding gates, window grills, safety doors, spiral staircases and mezzanine floors.
  • [Railings in Faridabad](/locations/faridabad/railings): stainless steel, glass and MS balcony railings and staircase railings.
  • [Sheds and pergolas in Faridabad](/locations/faridabad/sheds-pergolas): polycarbonate terrace sheds, MS pergolas, car parking sheds and glass canopies.
  • [Windows and doors in Faridabad](/locations/faridabad/windows-doors): aluminium sliding windows, uPVC windows, sliding and slide-and-fold doors, and mosquito mesh.
  • [Facades and shutters in Faridabad](/locations/faridabad/facades-shutters): ACP cladding, structural glazing, aluminium louvres and rolling shutters.

Glass styles have published per sq ft rates on the rate card. Gates, grills, railings, sheds, windows and facades are quoted after the site visit, because the steel section, the span and the fixing surface decide those prices.

Why steel needs more care here than glass

Faridabad's industrial air, summer heat and monsoon humidity are hard on mild steel. A gate or grill that is only given a coat of enamel without proper surface preparation and primer will show rust at the welds within a few seasons, which is why we discuss primer and paint against powder coating at the quote stage (see metal gate and grill rusting). On terraces, an uncoated polycarbonate sheet yellows under the sun, and a shed without a proper slope and gutter leaks in the first heavy rain (terrace shed leaking).

How a job runs in Faridabad

  1. Book a ₹99 site visit, or for a repair send a photo or video on WhatsApp.
  2. We visit, usually within 24 to 48 hours, measure, and check access, fixing surfaces and any society rules.
  3. The written, all-inclusive quote follows, aimed within about 2 hours and valid for 3 days.
  4. A 50% advance starts fabrication; toughened glass generally takes 7 to 10 days to produce.
  5. We install, and the balance 50% is paid on completion.

For Delhi-side sites see Delhi, and the FAQ has the full terms. Pick your area above, or book a site visit and we will come and measure.

Areas we cover in Faridabad

Common questions

Does FabWise work in Faridabad?

Yes. Faridabad is part of our core Delhi NCR service, with the same terms as Gurgaon and Noida: a ₹99 site visit, usually arranged within 24 to 48 hours, and a written all-inclusive quote aimed within about 2 hours of the visit. That covers NIT, Old Faridabad, the HUDA sectors, Mathura Road, Surajkund, Ballabgarh and Greater Faridabad.

How much does a bathroom glass partition cost in Faridabad?

Published rates are the same across Delhi NCR. A fixed frameless shower partition starts at ₹370 per sq ft, a frameless partition with door at ₹500 per sq ft, and a slim-profile partition with door at ₹1,100 per sq ft. The final quote counts the measured area and is all-inclusive for the agreed scope.

What is the price of an MS gate or window grill in Faridabad?

Gates and grills have no fixed published rate. The price depends on the size, the steel section, the design and the finish, such as primer and paint or powder coating. We measure at the site visit and quote in writing; the MS gate price guide explains what moves the number.

Faridabad mein site visit kitne din mein hoti hai?

Usually within 24 to 48 hours of booking. The visit costs ₹99, paid upfront, and is adjusted against the final bill if you go ahead. It is non-refundable and covers one visit. For repairs you do not need a visit at all: send photos or a video on WhatsApp and we quote from that.

Do you work in Greater Faridabad and Neharpar societies?

Yes. Sectors 75 to 89 across the canal are covered like the rest of the city. Many towers there are recently handed over, so societies usually ask for worker gate passes and set working hours, and some control balcony and facade changes. We check those rules at the visit before finalising the design.

How long does a shower cubicle or glass partition take?

Toughened glass generally takes 7 to 10 days to produce after the 50% advance, because it is cut to the exact size before tempering and cannot be trimmed afterwards. Installation itself is usually short. Metal, shed and window jobs are scheduled in the written quote, since their time depends on size and fabrication.

Site visit ₹199₹99Adjusted in the final bill

Book site visit

515 site visits requested

Support