Shop Fronts, ACP & Shutters in Old Faridabad

Old Faridabad is the original town, older than the sectors and the industrial township that grew around it. It sits beside the Faridabad railway station and the Old Faridabad metro station on Mathura Road in Sector 16A, and its streets are lined with shops, wholesalers, clinics and small offices with homes above. Glass and metal work here is mostly about the shop front: what customers see, what keeps the stock safe at night, and what survives the dust and the crowds.

The three layers of an Old Faridabad shop front

A typical street-facing unit in the old town has three layers, and each is a separate decision with a separate price logic.

The toughened glass shop front with door uses Saint-Gobain 12mm glass and SS304 anti-rust fittings, and its floor machine carries a 2 year functional warranty. It is set back behind the shutter so the shutter still closes cleanly; we measure that clearance at the visit.

Old buildings, uneven openings

Shop openings in the old town are rarely square. Floors have been relaid at different heights, lintels sag slightly, and side walls are often out of plumb. Toughened glass cannot be cut once it is tempered, so we measure at several points and design the front to the opening as it actually is, not as it should be. A rolling shutter is similarly sensitive: its guide channels must be straight even when the wall is not. The rolling shutter guide compares manual and motorised options for a heavy, daily-use shutter.

Market redevelopment and new fronts

The Municipal Corporation Faridabad has tendered redevelopment of the Sector 16A market, alongside the markets in Sectors 15 and 16. Civic work outside a shop is a common moment for shopkeepers to replace a tired front or signboard as well. If you are planning that, an ACP cladding band over the lintel gives a clean surface for lettering; the ACP cladding price guide explains how it is priced.

Repairs that cannot wait

In a busy market, a glass door that slams or will not lock is a daily irritation and a security gap. Most of these faults come from the floor spring, not the glass. Read glass door lock not working and shopfront door slamming, then send a short video on WhatsApp; a glass door floor machine repair is quoted from that, with no paid visit. A cracked panel is replaced with new glass made to size through broken toughened glass replacement.

Working around market hours

Shops in the old town lose money every hour they are shut, so installation is planned to keep the closure short. Measuring, fabrication and glass production happen with the shop open; only the final fixing needs the front cleared. Loading can be hard near the station and on market roads during the day, so we agree an arrival time with you. Homes above the shops have their own needs, covered on our metal fabrication in Faridabad page. For the full range of fronts see facades and shutters in Faridabad. Book a site visit and we will measure the opening as it really is.