Shop Facades, ACP Fascias & Shutters in Old Faridabad

Old Faridabad grew around the railway station long before the sectors were laid out, and its shop buildings show it. Facades and shutters in Old Faridabad have to deal with openings that lean, lintels that dip, and frontages that were extended piece by piece. With the Municipal Corporation tendering redevelopment of the Sector 16A market alongside Sectors 15 and 16, many shopkeepers are asking what a new front should look like once the civic work is done.

Building a straight face on a crooked opening

The trick with an old-town facade is that the finished surface must look square even when the masonry is not. ACP does this well: its aluminium sub-frame is packed and levelled off the wall, so the panels read as one flat plane over a lintel that sags by a few centimetres. A shutter cannot hide the problem the same way, because its channels must be truly vertical or the curtain binds. We measure both sides at several heights and set the channels plumb, packing behind them where the wall leans.

Timing a new front around the market redevelopment

If civic work is planned outside your shop, the floor and pavement levels at the opening may change. A shutter fitted before that could end up with its bottom slat too high or dragging. It is usually wiser to replace the ACP fascia and repair the existing shutter now, then fit a new shutter once the finished floor level is known. Toughened glass is the same: it is made to the exact opening and cannot be trimmed after tempering, so measure only when the floor is final.

Dust, soot and a front that stays clean

Station traffic and the old town's busy roads coat every surface. Flat ACP washes down easily; deep ledges and textured paint collect grime. Darker panel colours fade unevenly in strong sun, a problem described under ACP colour fading. Louvres need their blades set to shed rain, and loose blades rattle in wind; aluminium louvres explains how they are fixed.

What to check before the visit

• Whether the landlord or the market association has a rule on signboard size or colour.
• The depth between the shutter's outer face and where a glass front would sit.
• Whether the old shutter's drum box can be reused, or must come out with the curtain.
• Any noise or rattling already in the shutter, which shutter noisy helps diagnose.

A ₹99 visit, usually within 24 to 48 hours, covers measuring all three bands; the fee is adjusted against the final bill. The quote arrives in writing, aimed within about 2 hours, valid for 3 days and all-inclusive for the agreed scope. Work starts on a 50% advance and the balance is paid when it is fixed.

For the ground-floor glass and repairs, see the Old Faridabad area page. The city-wide view is at facades and shutters in Faridabad, and every style is in the facade and shutter catalogue. Larger showroom facades on the highway are covered under Mathura Road. Book a visit and we will measure the front as it really stands.