Metal fabrication · Faridabad
MS gate, grill and steel fabrication in Faridabad
FabWise makes and fits MS gates, sliding gates, window grills, safety doors, spiral staircases and mezzanine floors in Faridabad. Metal work is quoted after a site visit, with the steel sections, design and finish written into the quote, usually by area for gates and grills and per job for doors and stairs.
Faridabad has no shortage of welders. It is one of the country's oldest industrial towns, and every sector market has a fabrication shop. What is harder to get is a written specification: which steel section, what thickness, what finish, and who is responsible for hanging the gate straight. That is what FabWise adds to metal fabrication in Faridabad: one team that measures, puts the details in writing, fabricates and installs.
What a proper metal quote should say
Whoever you hire, a quote that says only "gate, as discussed" leaves room for a lighter section or a skipped primer. Ask for these in writing. Our guide on how to compare fabrication quotes goes deeper.
| Line in the quote | Why it matters |
|---|---|
| Frame section size and thickness | A lighter box section sags sooner and flexes on the hinges |
| Infill: bars, sheet, jaali | Sheet thickness decides whether it dents or drums |
| Finish: primer + paint, powder coat or galvanised | Decides how soon rust appears |
| Hinges, rollers, track, locks | The moving parts are what fail first |
| Civil work: pillars, foundations, track bed | Often left out and charged later |
| Installation and alignment | A gate that is not plumb drags within months |
The six metal products
| Product | Typical Faridabad use | Style page |
|---|---|---|
| MS main gate | HUDA sector houses with a front setback | MS main gate |
| MS sliding gate | Factory plots in Sectors 24, 25, 58, 59; short driveways | MS sliding gate |
| MS window grill | Ground floors in NIT and older sectors; society balconies within rules | MS window grill |
| MS safety door | Flat entrances in Greater Faridabad societies | MS safety door |
| MS spiral staircase | Terrace access in independent houses | MS spiral staircase |
| MS mezzanine floor | Storage decks in industrial units and wholesale godowns | MS mezzanine floor |
Browse them in the metal fabrication catalogue.
Industrial units: sliding gates and mezzanines
In the industrial sectors and IMT Faridabad, plot gates are wide and see trucks daily. A sliding gate on a ground track is standard, and its track bed must be laid on a proper foundation or the first loaded truck that runs over it will bend it. Inside, a mezzanine floor doubles usable space under a high roof. It is a structural job: the visit checks the floor, the columns and the planned load. A steel staircase and railing are part of the same scope. If a factory floor or stair already moves underfoot, see metal staircase wobbling or welding joint cracked.
HUDA houses and Greater Faridabad flats
The plotted HUDA sectors have independent houses with a front gate, a small lawn or parking, and windows at street level, so main gates and grills are the common order. Many 1980s and 1990s gates are now rusting at the bottom rail. In the Greater Faridabad societies the request is different: a safety door at the flat entrance, and grills only where the society allows them, since most societies control anything that changes the tower's face. Ask the maintenance office before ordering a balcony grill, and choose a safe window grill design with an openable section.
Finish for Faridabad's dust and monsoon
Industrial dust settles in hinges and tracks, and monsoon water sits at gate bottoms where drains overflow. Prime and paint is the basic finish; powder coating wears better; mild steel that stands in water does best with a galvanised base. The MS gate rust protection guide explains upkeep, and metal gate and grill rusting covers existing rust. A stuck sliding gate is often just a dirty track.
How it runs
- Book a ₹99 site visit, adjusted against the bill; it is generally within 24–48 hours.
- We measure, check pillars and floors, and agree the design and finish.
- Written, all-inclusive quote within about 2 hours, valid 3 days.
- 50% advance; fabrication in the workshop.
- Installation and alignment on site; balance on completion.
The MS gate price guide explains the cost drivers, and the main gate design guide helps with design. For other services in the city, see FabWise in Faridabad; for Gurugram, metal fabrication in Gurgaon. Send a photo of the opening on WhatsApp to begin.
Where in Faridabad
- NIT FaridabadNIT 1 to NIT 5, Neelam Chowk, Bata Chowk
- Old FaridabadOld town, Sector 16A, near Faridabad railway station
- Sectors 14 to 17Sectors 14, 15, 15A, 16, 16A and 17
- Sector 21 and BadkhalSectors 21A, 21B, 21C, 21D, near Badkhal Mor
- Surajkund and Charmwood VillageSurajkund, Charmwood Village (Sector 39), Badkhal–Surajkund Road
- Sainik ColonySector 49, Badkhal–Pali Road
- Mathura RoadNH-19 corridor, Sectors 28 to 37
- Faridabad industrial sectorsSector 24, Sectors 58 and 59, Neharpar Sectors 66 to 74
- BallabgarhBallabgarh town and nearby sectors, Raja Nahar Singh metro
Common questions
What is the rate of an MS gate in Faridabad?
MS gates have no fixed rate. They are quoted after a site visit, usually by the area of the gate, with sliding hardware and civil work listed separately. The steel section, design and finish make the biggest difference. The written quote is all-inclusive for the agreed scope and valid for 3 days.
Why use FabWise when there are welders in every Faridabad market?
You can, and some are excellent. What FabWise adds is a written specification (section sizes, finish, hardware), measurement and installation by the same team, and a fixed process from visit to handover. Whoever you choose, ask for those details in writing so quotes can be compared fairly.
Can you make a mezzanine floor for a factory in Sector 24 or 58?
Yes. A steel mezzanine floor is quoted by floor area after a site visit that checks the slab, columns, clear height and the load it must carry. Stairs and edge railings are included in the scope where needed. Installation can be planned around production days.
Society flat mein safety door lagwa sakte hain?
Usually yes. A safety door at the flat entrance sits inside the common corridor line, and most Greater Faridabad societies allow it, sometimes with rules on design or colour. Check with the maintenance office before ordering. It is quoted per door, including the frame, lock provision and finish.
How do I stop my gate from rusting at the bottom?
Rust starts where water sits: the bottom rail and hinge pins. Keep the area under the gate draining, touch up scratches before the monsoon, and ask for drain holes in hollow sections. For a new gate, powder coating or a galvanised base lasts much longer than paint alone.
Is there a warranty on gates and grills?
FabWise does not publish a warranty for the metal fabrication styles, so none is promised. The quote states the finish and hardware. Good upkeep, mainly cleaning tracks and hinges and touching up paint, does the most to keep metal work sound.
Services on this page
Every style, with its own page
- MS main gateA swing gate in mild steel for a house, builder floor or farmhouse, made to the opening and finished against rust.
- Sliding gateA gate that runs sideways on a track, for a driveway too short for a gate to swing. Motor-ready if you want one later.
- Window safety grillFixed or openable steel grills for windows and balconies, made to each opening.
- Steel safety doorA steel grill door in front of the main door, so it can stand open for air without standing open to the corridor.
- Metal staircaseSpiral or straight steel stairs to a terrace, mezzanine or loft, fabricated to the floor-to-floor height.
- Steel mezzanine floorA steel-framed extra floor inside a shop, warehouse or high-ceiling office, for storage or desks.
- All metal fabrication
Prices and problems
- MS gate price
- Iron gate or window grill is rusting and the paint is flaking
- Sliding gate is stuck, jerky or hard to push along its track
- Main gate has sagged and drags on the floor when opened
- Main gate lock or latch won't engage, or the key won't turn
- Gate hinge snapped, weld cracked or gate hanging off the pillar
- Window grill wobbles or has pulled away from the wall
Elsewhere
- MS & SS Metal Fabrication in Gurgaon
- MS & SS Metal Fabrication in Noida
- MS & SS Metal Fabrication in Delhi
- MS & SS Metal Fabrication in Ghaziabad
- MS & SS Metal Fabrication in Greater Noida
- MS & SS Metal Fabrication in Chandigarh
- Office Glass Partitions in Faridabad
- Bathroom Glass Partitions in Faridabad
- Glass Repair & Replacement in Faridabad
- Balcony & Staircase Railings in Faridabad