Saket · Malviya Nagar · ACP Cladding, Facades & Shutters
Building Facades and Shutters in Saket and Malviya Nagar
Facade work in Saket and Malviya Nagar is usually a refresh of a whole small building: ACP across the front, aluminium louvres to hide split-AC units and water tanks, glazing on the stair or office floors, and shutters at street level. ACP, louvres, glazing and shutters are all quoted after a site visit.
Facades and shutters in Saket and Malviya Nagar rarely mean a glass tower. The typical building is three or four storeys on a narrow plot along the Malviya Nagar market roads or in Saket's commercial pockets: a shop at street level, offices or clinics above, and a front covered in split-AC outdoor units, cables, old signboards and a water tank at the top. The owner wants the whole thing to look like one building again.
Hiding the clutter first
Before any cladding goes up, decide where the AC units and cables will live. Aluminium louvers mounted in front of the outdoor units hide them from the street while leaving enough open area for the units to breathe; spacing that is too tight makes the compressors run hot. The louvres entry explains blade angle and spacing. Cables are rerouted behind the cladding frame before panels are fixed.
| Style | Why it suits Saket and Malviya Nagar | Price |
|---|---|---|
| ACP cladding | Unifies a cluttered three- or four-storey front on a market road | Quoted after visit |
| Aluminium louvers | Screens split-AC units and tanks without choking them | Quoted after visit |
| Structural glazing | Office or clinic floors that want a glass face to the road | Quoted after visit |
| Rolling shutter | Street-level shops and pharmacies that close late | Quoted after visit |
ACP on a small building: what to specify
ACP cladding is panels of aluminium skin on a core, fixed to an aluminium or steel frame. On a building with clinics and a shop below, ask for a fire-retardant core rather than the cheapest polyethylene one; see ACP fire-retardant core. The joints between panels need a proper sealant or a dry gasket, and the top edge must be capped so rain cannot get behind. Panels that start to bulge or rattle in wind are covered in ACP panel loose; dark colours on a south- or west-facing front fade faster, as ACP colour fading explains.
Glass or ACP for the office floors?
Some owners want the upper floors to read as glass. Structural glazing bonds glass to a frame with no visible caps, but it adds heat to a west-facing room and needs careful sealing. A mix, ACP on the solid walls and glazing on the windows, is common. The structural glazing vs ACP guide compares the two.
Shutters for a late-closing market
Pharmacies near the hospitals and food shops in Malviya Nagar stay open late, and their shutters come down after midnight, so a noisy shutter annoys the flats above. Well-greased guides and a properly balanced spring reduce the rattle; shutter noisy covers the causes.
Checks before work on the front
- In a building with several owners, agree the colour, signage zones and cost split before ordering.
- Ask the MCD and the market association about signage size and projection; cladding should not push signs further out.
- Plan scaffolding around the morning, when parked cars and footfall are lightest.
The ₹99 visit, usually within 24 to 48 hours, includes measuring the front and checking the walls the frame will fix to. The written quote follows in about 2 hours and is valid for 3 days; a 50% advance starts work and the rest is due on completion. The ACP cladding price guide shows the main cost drivers.
See the Saket and Malviya Nagar page and nearby Greater Kailash, whose M Block market has similar fronts. Facades and shutters in Delhi and the facades catalogue list every option.
Common questions
How much does ACP cladding cost for a small Malviya Nagar building?
There is no fixed rate. The price depends on the area, the panel grade and core, the framing, any louvres or lettering, and the scaffolding needed. After the ₹99 site visit you get a written, all-inclusive quote valid for 3 days.
Can louvres hide AC units without damaging them?
Yes, if the blades leave enough open area and there is a gap between the louvre and the unit for hot air to escape. Packing louvres too tight makes compressors overheat. We plan the spacing around the units' airflow when designing the screen.
Building ke saare maalik alag hain, ACP kaise lagega?
The owners need to agree on the design, colour and how the cost is shared, because the front is common to all of them. Once that is settled, one person can coordinate with us. We measure the whole front at one visit and quote it as a single job, with floors itemised if you want to split the bill.
Is fire-retardant ACP necessary for a building with a clinic?
It is the safer choice for any occupied building, and some owners, insurers or authorities ask for it. A fire-retardant core costs more than the standard polyethylene core. We quote both where relevant so you can see the difference.
Services on this page
Every facades and shutters style
- ACP claddingAluminium composite panels on a frame over a shop or building front, in the colour of your signage.
- Structural glazingA glass facade bonded to an aluminium frame, so the outside of the building reads as one sheet of glass.
- Rolling shutterA roll-up steel shutter for a shop or garage, manual or motorised.
- Aluminium louvresFixed aluminium fins for a facade, a service duct or a balcony screen, to shade and hide without closing off the air.
- All facades and shutters