Laxmi Nagar & Preet Vihar · ACP Cladding, Facades & Shutters
ACP Facades, Signage and Shutters for Vikas Marg Buildings
Vikas Marg's multi-tenant buildings are often re-clad in ACP with a planned grid of signboards, so each coaching institute and shop gets a slot visible from the road and the metro. Fire-retardant panels matter on floors full of students. Facades and shutters are quoted after a ₹99 site survey.

Walk along Vikas Marg under the Blue Line viaduct and most buildings wear a patchwork of signboards: one institute per floor, each with its own board, angle and lighting. Students on the elevated metro platforms and in passing buses see the upper floors as much as the ground floor. A building-wide facade with a planned signage grid turns that patchwork into something tidy and readable. Our Laxmi Nagar and Preet Vihar area page introduces the area; this page covers the facade.
Designing a facade for many tenants
A multi-tenant re-cladding is a building decision, usually led by the owner or the building association. What it should settle up front:
- A signage grid. Equal or proportional slots for each floor's tenants, with backing and power built into the frame.
- Windows kept clear. Classrooms need daylight and fresh air, so the cladding frames windows rather than covering them.
- Panel core. On floors full of students, a fire-retardant ACP core is the responsible choice.
- Access for change. Tenants change; sign panels should be replaceable without cutting the cladding.
Facade and shop front styles
| Style | Why it suits Vikas Marg and its lanes | Price |
|---|---|---|
| ACP cladding | Building-wide re-cladding with a signage grid for every tenant | Quoted after visit |
| Aluminium louvers | Screening AC outdoor units hung on the front of classroom floors | Quoted after visit |
| Rolling shutter | Ground-floor shops on Vikas Marg and in the Shakarpur lanes | Quoted after visit |
| Toughened glass shop front | Ground-floor shops and the institute's street-level entrance | ₹500/sq ft |
The ACP cladding price guide explains what drives cost, and shop front design ideas has examples for the ground floor.
Working on a facade above a busy road
Vikas Marg carries heavy traffic all day, and the footpath below is crowded. Facade work needs the pavement protected and is usually best started early. The survey checks:
- How the frame anchors to slab edges and columns, not to infill brick.
- Where scaffolding or a lift can stand without blocking the road.
- Existing signboards and wiring that must be removed or rerouted.
- Clearances near the metro structure, where they apply.
Louvres for the AC units
Classroom floors run air conditioning from morning to late evening, and the outdoor units usually hang on the front wall. Left exposed, they spoil a new facade and drip onto the footpath. Aluminium louvre screens in front of them keep airflow open, hide the units and leave a hinged panel for servicing. Plan drain pipes into the frame so condensate runs down inside the cladding line.
Shutters in the inner lanes
Behind Vikas Marg, Shakarpur and Laxmi Nagar's lanes are narrow, with shops opening straight onto them. Shutters there are usually manual and compact, carried in by hand. A shutter lock that jams after a dusty summer is covered in shutter lock jammed.
Panels that start lifting after a few monsoons usually point to a frame or sealant problem; see ACP panel loose. The terms: a ₹99 site visit; a written, all-inclusive quote valid for 3 days; 50% advance; fabrication off site; installation in stages; balance on completion. See retail shops in Delhi, the facades and shutters catalogue, facades and shutters across Delhi, or nearby Shahdara and Dilshad Garden.
Common questions
How much does ACP cladding cost for a Vikas Marg building?
ACP has no fixed published rate. The facade area and height, panel grade and core, the frame, the signage grid and access all change the cost. After the ₹99 site survey you get a written, all-inclusive quote, valid for 3 days. Payment is 50% to start and 50% on completion.
Can each tenant keep their own signboard on a new facade?
Yes, within a grid. The facade frame includes a slot and backing for each tenant's board, usually of matching size, with power provided. When a tenant moves out, only their sign panel is swapped, without cutting or re-sealing the cladding around it, so the facade stays tidy as tenants change.
Building ka facade kaun decide karta hai?
Usually the building owner or the association of owners, because the facade is shared. Individual tenants can change their own shop front or shutter, but a full re-cladding needs the building's agreement. We survey and quote for whoever is commissioning it.
Every facades and shutters style
- ACP claddingAluminium composite panels on a frame over a shop or building front, in the colour of your signage.
- Structural glazingA glass facade bonded to an aluminium frame, so the outside of the building reads as one sheet of glass.
- Rolling shutterA roll-up steel shutter for a shop or garage, manual or motorised.
- Aluminium louvresFixed aluminium fins for a facade, a service duct or a balcony screen, to shade and hide without closing off the air.
- All facades and shutters




