Sahibabad Industrial Area · Ghaziabad

Factory Fabrication in Sahibabad Industrial Area, Ghaziabad

Sahibabad Industrial Area is a dense UPSIDA estate of factories and warehouses, so the work is steel first: mezzanine floors for storage, rolling shutters, loading-bay sheds and sliding gates, plus a glass office cabin on the shop floor. Steelwork is quoted after a ₹99 site visit; cabins start at ₹1,100 per sq ft.

Updated 8 October 2026Sahibabad Industrial Area, Ghaziabad

MS mezzanine floor with a steel staircase and railing built inside a factory or warehouse bay

The Sahibabad Industrial Area is one of the older industrial estates of the NCR, on the western edge of Ghaziabad, run by UPSIDA (formerly UPSIDC) and split into numbered sites, of which Site 4 is the best known. Plots here are packed with auto-ancillary, electrical, pharmaceutical and plastics units, small manufacturers and traders, and warehouses, with Link Road and the Sahibabad station on the Namo Bharat (RRTS) corridor close by. A factory plot in Sahibabad needs very different fabrication from a flat in Indirapuram a few kilometres away: more steel, bigger openings and a client who cannot stop production for the installer.

Industrial jobs that come up most

Common fabrication work on a Sahibabad factory plot
Need	Fabrication	What decides the design
More storage without more land	MS mezzanine floor	Load per sq m, column grid, headroom below
Securing a loading bay or godown	Rolling shutter, manual or motorised	Opening width and height, frequency of use
Covered loading or parking	Car parking shed or open-sided shed	Span, truck height, drainage
A wide vehicle gate	MS sliding gate	Opening width, wall run, track level
An office on the shop floor	Aluminium profile partition with door	Dust, noise, visibility of the floor

Mezzanine floors: storage by the square metre

On a fixed plot the cheapest new floor area is often above your existing floor. An MS mezzanine floor is a steel frame of columns and beams with a deck of chequered plate or boards, a staircase and a railing. What it will carry is decided by what goes on it: light cartons, heavy reels and a pallet truck are very different loads, so tell us what will be stored. The visit checks the existing floor slab where the columns will stand, the clear height, and the path for material to come in. The design and quote follow from that.

Shutters and gates that are used all day

Industrial shutters run many cycles a day, and a stuck shutter can stop a dispatch. For wide or tall openings, or ones used constantly, a motorised shutter saves effort and wear on the springs; the guide to manual vs motorised rolling shutters sets out the trade-off. Common faults are covered in rolling shutter stuck and shutter lock jammed. On a wide plot frontage, an MS sliding gate avoids the swing of a hinged gate; see sliding gate stuck for what usually goes wrong with the track.

Glass where the office meets the floor

Most units keep a small office or QC room on the factory floor, with glass so the supervisor can see the line. An aluminium profile office partition with door, from ₹1,100 per sq ft, seals better against dust and noise than an open frameless system and is easy to move if the layout changes. Its floor machine has a 2 year functional warranty. For a clean room or a front office, a frameless fixed glass office partition from ₹350 per sq ft is also an option.

Working without stopping production

Steelwork is fabricated off site and brought in ready to bolt or weld, so the time on your floor is short.
Welding and cutting on site can be planned for a shift change, a weekly off or a holiday.
We check access for long members and the route a mezzanine's beams take into the bay.
Any fire, safety or estate-level rules you follow are discussed on the visit.

More for industrial clients is on the warehouses and factories page and on MS fabrication in Ghaziabad. The residential neighbours are Vasundhara and Vaishali. Book a site visit and bring your load and usage details.

Near Sahibabad Industrial Area

Common questions

How much does an MS mezzanine floor cost in Sahibabad?

There is no per-sq-ft rate, because the load it must carry, the span between columns and the deck type change the steel weight, which drives the price. It is quoted in writing after the site visit, all-inclusive for the agreed design. Tell us what will be stored on it so the design matches.

Should I get a motorised rolling shutter for my factory?

For wide or heavy shutters, or ones opened many times a day, motorised usually makes sense: it saves effort and reduces strain on the springs. A small godown shutter opened twice a day works fine manually. Both are quoted after the visit, once the opening and usage are known.

Factory mein mezzanine banwane mein production rokna padega?

Usually only briefly. The steel is fabricated off site, so the on-site work is mostly fixing columns and beams and laying the deck. Welding and cutting can be planned for a shift change, a weekly off or a holiday. The schedule is agreed in the quotation.

What glass partition suits a factory office in Sahibabad?

An aluminium profile partition with door usually suits a shop-floor office, because the frame and seals keep out more dust and noise and it can be moved if the layout changes. It starts at ₹1,100 per sq ft. A frameless fixed partition from ₹350 per sq ft suits a cleaner front office.