Aluminium-Framed Glass Cabin with Door

Why choose a frame when frameless costs less here

On our rate card the framed cabin is the premium option, not the budget one. Many fabricators frame thinner glass to save money; ours puts the frame around the same 12mm toughened glass as a design addition. That is extra material on every pane plus the work of setting it true, which is why it sits at ₹1,100 per sq ft against ₹400 per sq ft for the frameless glass cabin with door.

So the frame has to earn its place. It usually does in two situations. First, old or uneven structure: a slab that dips across the room or a column that leans takes up gaps a frameless panel would show, because the frame's channel hides small variations. Second, the look: a black grid reads as deliberate architecture, and it pairs well with exposed ceilings, black light tracks and warehouse-style fit-outs.

If neither applies, frameless is the cleaner and cheaper build, and a fixed frameless glass wall is cheaper still where no door is needed. Compare all of them in the office glass partitions catalogue.

Glass, frame and door hardware

The glazing is 12mm Saint-Gobain toughened glass, the same thickness as the frameless cabins. It sits in a black aluminium frame, which is the documented finish for this style; if you want white, raise it at the visit. Fixings and door hardware are SS304.

Framed systems usually work in two stages. The profiles are fixed to floor, walls and ceiling first and set straight and plumb, and the glass is then placed into them with gaskets or glazing tape. Because the frame does the levelling, the glass can be cut to slightly more forgiving sizes than a frameless panel that has to meet an uneven wall on its own.

The door is normally a framed or frameless glass leaf on a floor machine. The floor machine carries a 2 year functional warranty. Warranty covers fittings, not glass.

Transom panels above the door, mullions that line up with ceiling grids or desks, and frosted bands inside the frame are all common ways to customise the layout, and all are settled before the glass goes into production.

How much a framed cabin costs: three examples

Like every office style, the framed cabin is priced per sq ft of glass, from ₹1,100 per sq ft. Typical sizes:

Single front, 10 ft wide × 9 ft high (90 sq ft): ₹99,000

Two-sided corner room, 8 ft + 8 ft × 9 ft (144 sq ft): ₹1,58,400

Meeting room, 12 ft + 10 ft × 9 ft (198 sq ft): ₹2,17,800

The same factors that move any glass partition quote apply: frosted or fluted glass, a double door, locks, extra mullions or transoms, ceiling height and access. Floor area does not, which surprises people: an L-shaped run that encloses a large room can cost less than a four-sided box around a small one.

If you are deciding between framed and frameless purely on budget, run both through the aluminium glass partition price guide and the office glass partition cost guide. The visit will tell you whether the floor actually needs a frame.

What happens between the visit and a finished cabin

The ₹99 site visit is usually arranged within 24–48 hours. For a framed cabin it focuses on the structure: how far the slab and walls are out of level, where the frame can be anchored, what runs above the ceiling, and where the door will open without hitting desks or a column. The fee is adjusted against your final bill if you go ahead.

The all-inclusive quotation aims to arrive within about 2 hours of the visit and stays valid for 3 days. Fabrication starts once the 50% advance is paid. The toughened glass generally takes 7–10 days to produce, and the installation date is confirmed for your site.

On site, the frame goes up first, then the glass, then the door and its adjustment. The remaining 50% is due when the agreed work is complete. Offices in the converted industrial buildings of Udyog Vihar, where floors are rarely perfectly level, are exactly where a frame tends to make sense. For Noida offices, see glass office partitions in Noida.

Caring for the frame, the glass and the door

Aluminium needs only a damp cloth and a mild detergent. Avoid solvent cleaners, which can dull a powder-coated or anodised finish, and keep scrapers off the frame edges. Clean the glass as you would any office glass, with a soft cloth and nothing abrasive.

Gaskets in the frame do slowly harden over years. If a panel starts to tick or buzz, the cause is usually a loose glazing bead or a gap at a fixing; glass partition rattling explains what to look for.

The door is the part that works hardest. A door that has dropped and started catching the floor is described in glass door dropped and dragging, and a lock that no longer lines up with its keep is covered in glass door lock not working. Both are usually adjustments to the floor machine or patch fittings, and the floor machine is under a 2 year functional warranty. For a fuller walk-through of fitting glass in an office, read office glass partition installation in Gurugram.