Sector 18 & Atta Market, Noida

Shop Fronts, Shutters and Glass Repair in Sector 18, Noida

For Sector 18 and Atta Market shops, FabWise fits 12mm toughened glass shop fronts with doors from ₹500 per sq ft, plus rolling shutters, ACP signage faces and repairs to glass doors that have dropped or stopped closing.

Updated 8 October 2026Sector 18 & Atta Market, Noida

Toughened glass shop front with a frameless glass entrance door

Sector 18 in Noida is the city's shopping street in the old sense: a grid of showrooms, eateries and offices around the Sector 18 Blue Line station, with the DLF Mall of India on one side and Atta Market a few minutes' walk away on the Sector 27 edge. Almost every unit here is a ground-floor shop with a glass front, a shutter behind it and an office or store above. That is the work this page is about.

What does a Sector 18 shop front actually take?

A typical market-road unit has a masonry or RCC opening, often the full width of the shop, with a rolling shutter on the outside and a glass front inside it. The glass is usually 12mm toughened, with a frameless door on a floor spring and fixed side panels held in patch fittings or a channel. A toughened glass shop front with door from FabWise uses 12mm Saint-Gobain toughened glass and SS304 fittings, and the floor machine carries a 2 year functional warranty.

Three things about these buildings change the job. Openings are rarely square, because decades of re-plastering and new flooring have moved the lines, so the measurement has to be taken at several points. The floor in front of the door has often been raised by a new tile layer, which buries the floor spring box too deep or too shallow. And the shutter guides eat into the clear width you have for glass, so the shutter and the glass need to be planned together.

What a Sector 18 shop front survey covers
Element	What we check on site	Why it matters here
Opening	Width and height at three points, out-of-square	Toughened glass cannot be cut after tempering
Floor	Level of finished floor, spring box depth	Re-tiled market floors move the door's pivot
Shutter	Guide channel depth, lock position	Guides reduce the clear width for glass
Signage	Fascia above the opening, ACP or flex	Shopfront and sign face are often redone together

Which services matter most in Sector 18?

Commercial glass first

The shop front is the shop's advert, so new tenants usually replace it. Upper-floor offices and salons above the showrooms use frameless fixed glass partitions to split reception from work areas. All of this sits in the office glass partitions family in Noida.

Facades and shutters

Rolling shutters take a beating on a street that opens and closes every day, and a fresh fascia often means ACP cladding for the sign band. A rolling shutter is quoted after the visit because size, gauge and whether it is manual or motorised change the price. If an existing one jams halfway, read rolling shutter stuck first. The wider range is on facades and shutters in Noida.

Repairs, because doors here work hard

A shop door that swings a few hundred times a day wears out its floor spring long before a home door would. When the door stops closing by itself or starts dragging on the floor, a floor machine repair is the usual fix. Repairs are quoted from a photo or video on WhatsApp, with no paid visit.

Working around trading hours

A shopfront job means opening up the front of a trading business, so timing is everything. In practice:

The site visit is best done before opening or late afternoon, when the pavement is quieter and the shutter can be raised fully for measuring.
Toughened glass is made to the measurement and generally takes 7–10 days after the advance, so nothing changes at your shop during that time.
Installation is planned around your trading hours, and the changeover from the old front to the new one is scheduled with you at the visit, so the shop is not left open overnight.
Unloading large panels on a busy market road needs a vehicle close to the unit, so we ask about parking and loading restrictions in your lane in advance.
Market associations and mall managements may have their own rules on facade changes and signage size. Check those before you sign off a design.

Pricing for a shop in Sector 18

Glass shop fronts are priced per sq ft of glass, from ₹500 per sq ft. A front 10 ft wide and 9 ft high is 90 sq ft, which works out to about ₹45,000 at the starting rate before any extras the site needs. Shutters, ACP and metal work are quoted after measurement. For the reasoning behind each number, see the glass door installation cost guide and the ACP cladding price guide.

Businesses further out run into the same issues in different buildings: office tenants in Sector 62, and kothi owners in Sectors 44–50 just south of here. Book a visit for a new front, or send a photo on WhatsApp if a door or panel needs fixing.

Near Sector 18 & Atta Market

Common questions

How much does a glass shop front cost in Sector 18 Noida?

A 12mm toughened glass shop front with a door starts from ₹500 per sq ft of glass. The final quote depends on the opening size, the floor and the fittings, and is given in writing after the site visit, usually within about two hours. It is all-inclusive for the agreed scope and valid for 3 days.

Can you fit the new glass front without closing my shop for days?

Usually yes. The glass is made to measure off-site, which generally takes 7–10 days, and your existing front stays in place meanwhile. Installation is planned as one slot, timed around trading hours where possible, so the shop is not left open overnight.

Dukaan ka glass door band nahi hota, kya karein?

A shop door that no longer closes by itself almost always has a worn or leaking floor spring, or a door that has dropped on its pivot. Send a short video of the door opening and closing on WhatsApp and we will quote the repair from it, without a paid site visit.

Do you install rolling shutters in Atta Market and Sector 18?

Yes. Rolling shutters are part of our facades and shutters work. There is no fixed rate because the width, height, slat gauge and choice of manual or motorised operation change the cost, so they are measured and quoted at the site visit, ideally together with the glass front behind them.