Old Gurgaon · ACP Cladding, Facades & Shutters
Rolling Shutters & Shop Fascia in Old Gurgaon
In old Gurgaon, facade work means rolling shutters for shops and godowns, often decades old and heavy to lift, and simple ACP fascia for signage. A shutter can sometimes be serviced; if not, a new one is quoted after a ₹99 site visit, manual or motorised.
Shutters are the facade in old Gurgaon. Along Sadar Bazaar, in Jacobpura and around the old railway road, almost every shop and godown closes behind a steel rolling shutter, raised in the morning and pulled down at night, every day for years. Above it, a painted board or a strip of cladding carries the shop's name. When the shutter goes heavy or jams, the shop cannot open or lock. This page covers those two things for the market streets of Gurugram's old city.
Why an old shutter gets heavy
A rolling shutter is balanced by springs inside the barrel above the opening. As they lose tension over years, the shutter gets heavier to lift and drops faster. Meanwhile the guide channels on each side fill with dust and rust, and slats bend where they have been kicked or hit by handcarts. Each fault has a different fix.
| Symptom | Usual cause | Answer |
|---|---|---|
| Heavy to lift, drops fast | Springs have lost tension | Re-tension or replace springs if the barrel is sound |
| Sticks partway | Guides full of dust, or a bent slat | Clean guides, straighten or replace slats |
| Lock will not turn or catch | Rusted lock or misaligned bottom bar | See shutter lock jammed |
| Barrel rusted, slats torn | End of service life | New shutter, quoted after visit |
Some of these can be judged from a video, so send one before booking. Rolling shutter stuck explains what to film.
A new shutter: what to decide
| Style | Why it suits old Gurgaon | Price |
|---|---|---|
| Rolling shutter, manual | Narrow shop openings opened by hand once or twice a day | Quoted after visit |
| Rolling shutter, motorised | Wide godown doors where lifting by hand is a strain | Quoted after visit |
| ACP cladding | A clean fascia for the shop name above the shutter | Quoted after visit |
| Aluminium louvres | Ventilation panels above a godown shutter | Quoted after visit |
Slat gauge decides strength and weight; a heavier gauge resists forcing but needs stronger springs or a motor. Perforated slats let passers-by see the display at night. A motor suits a wide godown door, as long as there is a power point and a manual override for power cuts. The manual vs motorised rolling shutter guide compares them.
Fascia above the shutter
A strip of ACP over the shutter box gives a shop a neat signage band and hides an old, stained lintel. On a small front it is a simple job, but the frame must leave the shutter box accessible for servicing. Choose a fire-retardant core panel for a building with people living above.
Working in a market lane
Market lanes are crowded from morning to night, and a shutter barrel is long and heavy. Installation is planned for early morning or a closed day, and parts may be carried from the main road. Agree the timing with neighbouring shops if the lane will be partly blocked.
The ₹99 visit is usually within 24 to 48 hours. The written quote follows within about 2 hours, valid for 3 days, and fabrication starts on the 50% advance.
See glass and shutters for retail shops in Gurgaon and the ACP cladding price guide. Browse all facade and shutter styles or facades and shutters in Gurgaon, and see the old Gurgaon page for the area. Showrooms on MG Road face the same shutter wear on a larger scale.
Common questions
Dukaan ka shutter bahut bhaari ho gaya hai, naya lena padega?
Not always. A heavy shutter usually has springs that have lost tension, which can often be re-tensioned or replaced if the barrel and slats are sound. If the barrel has rusted or slats are torn, a new shutter is better value. A video on WhatsApp shows which.
Should I get a motorised shutter for my godown?
For a wide or heavy shutter opened several times a day, a motor saves effort and wears the shutter more evenly. It needs a power point and a manual override for power cuts. For a narrow shop opened twice a day, manual is usually fine.
How much does a new rolling shutter cost in old Gurgaon?
Rolling shutters have no fixed published rate. Opening size, slat gauge, plain or perforated slats, finish, and manual or motorised operation all change the price. After the ₹99 site visit you get a written, all-inclusive quote, valid for 3 days.
Can a shutter be replaced without closing the shop for long?
Yes. The new shutter is made in the workshop after the 50% advance, and the swap on site is usually done in part of a day, early morning or on your closed day. Agree the slot with neighbouring shops if the lane will be partly blocked.
Services on this page
Every facades and shutters style
- ACP claddingAluminium composite panels on a frame over a shop or building front, in the colour of your signage.
- Structural glazingA glass facade bonded to an aluminium frame, so the outside of the building reads as one sheet of glass.
- Rolling shutterA roll-up steel shutter for a shop or garage, manual or motorised.
- Aluminium louvresFixed aluminium fins for a facade, a service duct or a balcony screen, to shade and hide without closing off the air.
- All facades and shutters