Site visit within 24–48 hours in Delhi NCRHow it works

Sonipat · project basis

Facades and rolling shutters in Sonipat for factories and highway frontage

FabWise builds facades and shutters in Sonipat as projects: ACP cladding and structural glazing for highway showrooms and dhabas, louvres and rolling shutters for Kundli and Rai factory sheds. Share elevations or photos on WhatsApp; scope and visit terms are agreed first, then a written, all-inclusive quote follows.

Updated Sonipat

Aluminium composite panel cladding on a commercial building front with a signage band

On the Murthal stretch of NH-44 at dinner time, dozens of dhabas compete for cars that decide in seconds where to stop. Further south, the Kundli estate on the Delhi border is full of sheds whose loading bays open and close all day. Both need facades and shutters in Sonipat, but for opposite reasons, one to be noticed and the other to be shut tight. FabWise, working out of Gurugram, takes these on in Sonipat as projects.

Frontage that sells versus frontage that secures

A roadside restaurant wants a bright, cleanable face with a signage band and glass. A factory wants ventilation without rain, and openings that lock. The four styles in our facades and shutters catalogue split roughly along that line.

Facade and shutter options for Sonipat projects
StyleTypical Sonipat useThing to decide early
ACP claddingDhaba and showroom fronts, factory office blocksFire-retardant core or standard, and the colour against highway dust
Structural glazingCar showrooms, institute admin buildingsGlass type for west sun and how it will be cleaned
Rolling shutterLoading bays, godowns, shop frontsManual or motorised, and the opening width
Aluminium louvresShed walls, plant rooms, stair coresBlade angle for airflow versus rain

What Sonipat's conditions do to a facade

Highway soot shows on gloss white; darker matte ACP hides it longer. Monsoon rain driven across open farmland tests every ACP joint, so sealant matters more than panel brand. For buyers weighing a glass face against panels, the structural glazing versus ACP guide sets out the trade-offs, and the glossary entry on fire-retardant ACP cores is worth reading before any building that people sleep or eat in.

In Rai and Barhi factories the question is whether wide shutters should be motorised; our comparison of manual and motorised rolling shutters covers where the motor pays for itself.

From elevation drawing to finished front

The project starts on WhatsApp with whatever you have: an elevation, or a phone photo of the front with a rough width. The team confirms what is in scope, say cladding, signage band and two shutters, and what is not. A visit is then scheduled with its terms agreed in advance. After measurement you receive a written quote that is all-inclusive for that scope. Frames, panels and shutters are fabricated, and a travelling installation team puts them up, with scaffolding planned in the quote.

What drives the price of a facade or shutter job

  • Elevation area and the number of returns, corners and soffits.
  • Panel specification: core type, finish, and colour.
  • Shutter width, gauge and whether it is motorised.
  • Working height, scaffolding and access from a busy road.

Why not split it between local trades?

For a single repair, a local fixer may be right. On a full front, cladding, glazing and shutter meet at the same edges, and when three contractors share an edge, water finds the gap. One managed team owns those junctions. If something later works loose, our page on an ACP panel coming loose and on a rolling shutter that gets stuck explains what usually causes it. See also how we approach restaurants and cafes and the wider commercial work we do. Send your elevation or a photo of the front on WhatsApp to begin.

Common questions

Do you do ACP cladding and shutters in Sonipat?

Yes, as projects. A full showroom or dhaba front, a factory office block in cladding, or a set of loading-bay shutters are the kind of jobs we travel for. Send photos or elevations on WhatsApp; we confirm the scope and agree the visit terms before anything is scheduled.

What is the minimum job you take in Sonipat?

We do not publish a fixed minimum. A single small shutter is usually not worth a team's trip on its own, and we will say so rather than quote it badly. A complete front, several shutters, or cladding combined with glazing generally is. Send the details and you will get an honest answer quickly.

How is a facade project priced outside Delhi NCR?

Each Sonipat project gets a written quote after the scope is confirmed and the site is measured. It is all-inclusive for the agreed scope, covering material, fabrication, transport and installation. There is no per-sq-ft rate card for facade work; the elevation, access and specification decide the figure.

Dhaba ke front ke liye ACP sahi rahega ya glass?

For most highway dhabas, a mix works best: ACP for the signage band and solid areas, and toughened glass where diners should be seen from the road. All-glass fronts heat up badly on west-facing highway plots, and full ACP hides the activity that draws cars in.

Can shutters be motorised later?

Often yes, if the shutter and its bracket were sized for it. If you think you may want a motor within a few years, say so at the start so the shutter is specified to take one, which costs less than replacing it.

Project in Sonipat?Share drawings or photos, get a written quote

Support