Glass, Pergolas and Shutters for Restaurants and Cafés in Gurgaon

Glass and metal work for a restaurant or café is half engineering, half atmosphere. Diners in Gurgaon, Noida and Delhi choose a place partly from the pavement: whether they can see a full room through the front, whether the terrace looks shaded and dry. The kitchen, meanwhile, needs glass that copes with heat and grease, and the owner needs the place locked tight at 1 a.m. Here is how those needs translate into fabrication.

Street to kitchen: what each zone needs

Two of these deserve a closer look. Kitchen-facing glass should be toughened glass, kept a sensible distance from burners and fixed so it can be cleaned on both sides; a smooth clear panel wipes down far more easily than fluted glass, whose ridges hold grease. And outdoor seating covers are a choice between open steel and a roof, which our terrace pergola designs guide and polycarbonate vs metal sheet roof comparison work through.

Pergola, shed or nothing: what suits outdoor seating?

• Open pergola for evening seating and shade from slats; it adds character but does not keep rain out. Finish matters: steel left outdoors needs a primer and paint or powder coating, or hot-dip galvanising for the longest life.
• Pergola with a polycarbonate roof for monsoon-proof seating with daylight. A UV-coated polycarbonate sheet resists yellowing far better than an uncoated one.
• Full shed for a rooftop that trades in every season, with gutters sized for Delhi NCR monsoon downpours.

How do you fit out a restaurant without losing a service?

For a new restaurant, fabrication runs alongside the interior fit-out, and the glass front usually goes in late so it is not scratched by other trades. For a running restaurant, the plan is built around service times:

1. Site visit (₹99, adjusted against the bill), usually within 24–48 hours, ideally in the quiet afternoon gap between lunch and dinner.
2. Written, all-inclusive quote, aimed within about two hours of the visit and valid three days. Glass fronts are priced from the rate card; pergolas, sheds, shutters and folding doors are priced from the visit.
3. Fabrication after the 50% advance. Toughened glass generally takes 7–10 days; steel is fabricated and finished off site so the welding happens away from your diners.
4. Installation in the morning before opening, or across a weekly closed day, one zone at a time.
5. Balance 50% on completion, with one contact for any adjustment.

Fire safety approval for a restaurant is a separate process that depends on size and building type; keep exits, door swings and any glass on escape routes in mind when planning, and check with your consultant.

What does restaurant glass and metal work cost?

The street front is a rated style: a glass shopfront with door is ₹500 per sq ft, and an internal kitchen screen as a fixed glass wall is ₹350 per sq ft. A 6 ft by 4 ft kitchen viewing panel is 24 sq ft, about ₹8,400. Pergolas and sheds depend on span, steel section, roof sheet and finish; folding doors on the number of panels and the track; shutters on width and drive. See terrace shed cost for how shed quotes are built.

Restaurants and cafés by city

Local guides: restaurants and cafés in Gurgaon, in Noida and in Delhi. Outdoor work is under sheds and pergolas in Gurgaon, Noida and Delhi. In Gurugram, Cyber Hub and Golf Course Road have very different landlord rules for terraces. All covered cities are on the Delhi NCR page.

What fails in restaurants?

Heavy door traffic and weather do most of the damage: entrance doors slamming, sheds leaking or noisy in rain, pergolas rusting and sliding doors off their track.

Send photos of the space on WhatsApp, or book a site visit between services.