Sonipat · project basis
Metal fabrication in Sonipat for industrial plots, godowns and farmhouses
FabWise takes on metal fabrication projects in Sonipat: sliding gates for industrial plots, MS mezzanine floors for godowns, safety doors, grills and spiral staircases. Send drawings or photos on WhatsApp; scope and visit terms are agreed first, and the written quote is all-inclusive for that scope.
An industrial plot in Kundli or Barhi usually needs the same list: a gate trucks can pass, a mezzanine under a high shed roof, a safety door for the stores, and grills on boundary windows. Farmhouse owners want a gate that looks good as well. Metal fabrication in [Sonipat](/locations/sonipat) is taken on by FabWise as projects, made to drawings and installed by a travelling team from our Gurugram workshop network.
Six things Sonipat plots commonly need
| Item | Where it shows up in Sonipat | Key specification |
|---|---|---|
| MS sliding gate | HSIIDC plots in Kundli, Rai, Barhi and Murthal | Track, rollers and the opening width trucks actually need |
| MS main gate | Farmhouses, institutes, plotted houses | Leaf weight, hinge type and pillar strength |
| MS mezzanine floor | Godowns, workshops, cold rooms | Load per sq ft and column positions |
| MS safety door | Stores, cash rooms, residential entries | Locking points and frame anchorage |
| MS window grill | Boundary-facing windows, hostels | Bar spacing and fixing into the masonry |
| MS spiral staircase | Roof access on sheds and houses | Diameter, tread width and landing |
Every one is in our metal fabrication catalogue. None has a published rate, because the size, steel section and finish change the figure too much for a rate to mean anything.
Mezzanines: the job that most needs a drawing
A mezzanine is where a guess is dangerous. The load decides beam sizes and column spacing, and columns must clear racking and forklift paths. Expect to agree a drawing, with the intended load written on it, before any steel is cut.
Gates on industrial plots: width first, design second
Truck access makes the clear opening the first question. A sliding gate needs a clear run beside the opening equal to its width; without it, a swing or telescopic design is considered. If the gate will be automated later, the sliding gate automation guide explains what to plan for now, and MS gate rust protection covers the primer, paint and galvanising choices that matter on open plots.
How a Sonipat metal project runs
You send a sketch with sizes, a drawing or photos of the openings on WhatsApp, and we confirm scope item by item. A site visit is then scheduled with its terms agreed before anyone travels, and measurement on site settles the details that photos miss, like how much the pillars lean. The written quote that follows is all-inclusive for the scope agreed. The steel is fabricated, primed and finished in the workshop, and a travelling team installs it around your operations.
What sets the cost
- Steel weight, which follows from the sections the drawing needs.
- Finish: red oxide and enamel, epoxy, powder coat or galvanising.
- Automation readiness for gates.
- Design work such as laser-cut panels.
- Installation difficulty: crane access, working height, live operations.
One accountable team for an out-of-town site
For a quick repair, a local welder is often sensible. For a planned set of gates, a mezzanine and doors, one team that measures, fabricates and installs keeps drawing and steel in step. If anything later sticks or cracks, see our pages on a sliding gate that is stuck and a cracked welding joint. We also cover factories and warehouses across the commercial hub. Send your drawings or photos on WhatsApp to begin.
Common questions
Do you do metal fabrication work in Sonipat?
Yes, as projects. Gates for industrial plots, mezzanines, safety doors, grills and staircases in Sonipat are made to drawing and installed by our own team. Send the requirement on WhatsApp and we confirm the scope and the visit terms before anything else is scheduled.
Is there a minimum size for a Sonipat metal job?
No fixed figure, but honestly, one window grill will not justify a team's trip. A gate plus grills, a mezzanine, or a set of items for a new plot usually will. Tell us everything the site needs in one message, because bundling items is what makes an out-of-town job sensible.
Godown mein mezzanine floor lagwane mein kitna time lagta hai?
It depends on the size, the load and whether a drawing already exists. The steps are scope confirmation, a site visit, the written quote, workshop fabrication and installation. Once the drawing is agreed, the timeline for your mezzanine is written into the plan, not guessed.
Do you need a structural drawing for a mezzanine?
For anything carrying heavy stock, machinery or many people, yes, and we will ask what load it must take. If your consultant has drawn it, send it. If not, tell us the intended use and we will explain what the design needs before quoting.
How is pricing done for metal work in Sonipat?
Through a written, all-inclusive quote for the agreed scope, after a site visit. We do not publish rates for metal fabrication because steel sections, finish and installation conditions vary too much between jobs for a single rate to be honest.
Services on this page
Every style, with its own page
- MS main gateA swing gate in mild steel for a house, builder floor or farmhouse, made to the opening and finished against rust.
- Sliding gateA gate that runs sideways on a track, for a driveway too short for a gate to swing. Motor-ready if you want one later.
- Window safety grillFixed or openable steel grills for windows and balconies, made to each opening.
- Steel safety doorA steel grill door in front of the main door, so it can stand open for air without standing open to the corridor.
- Metal staircaseSpiral or straight steel stairs to a terrace, mezzanine or loft, fabricated to the floor-to-floor height.
- Steel mezzanine floorA steel-framed extra floor inside a shop, warehouse or high-ceiling office, for storage or desks.
- All metal fabrication
Prices and problems
- MS gate price
- Iron gate or window grill is rusting and the paint is flaking
- Sliding gate is stuck, jerky or hard to push along its track
- Main gate has sagged and drags on the floor when opened
- Main gate lock or latch won't engage, or the key won't turn
- Gate hinge snapped, weld cracked or gate hanging off the pillar
- Window grill wobbles or has pulled away from the wall
Elsewhere
- MS & SS Metal Fabrication in Gurgaon
- MS & SS Metal Fabrication in Noida
- MS & SS Metal Fabrication in Delhi
- MS & SS Metal Fabrication in Faridabad
- MS & SS Metal Fabrication in Ghaziabad
- MS & SS Metal Fabrication in Greater Noida
- Office Glass Partitions in Sonipat
- Balcony & Staircase Railings in Sonipat
- ACP Cladding, Facades & Shutters in Sonipat