Ecotech, Kasna & Surajpur, Greater Noida

Factory Fabrication in Ecotech, Kasna and Surajpur, Greater Noida

For factories and warehouses in Ecotech, Kasna and Surajpur, FabWise builds MS mezzanine floors, sliding gates, rolling shutters, loading-bay sheds and glass office cabins inside the plant. Industrial metal work is quoted after measurement; glass cabins start from ₹1,100 per sq ft.

Updated 8 October 2026Ecotech, Kasna & Surajpur, Greater Noida

Mild steel mezzanine floor with a staircase and railing inside an industrial shed

Greater Noida's industrial estates sit in a band around Kasna and Surajpur: the GNIDA Ecotech blocks, including Ecotech I and its extension, Ecotech II and Ecotech III, alongside the older estates at Kasna Site IV and V, EPIP Kasna and Surajpur Site B. Most plots carry a single-storey shed with a high roof, an office block at the front and a gate onto a wide estate road. Industrial fabrication in Ecotech and Kasna is about making that shed work harder: more usable floor, safer loading, better security.

Running out of floor? Build up, not out

Most sheds have far more height than they use. An MS mezzanine floor adds a deck for storage, a packing line or an office without touching the plot boundary. What decides the design:

Planning a mezzanine in a Greater Noida factory shed
Question	Why it matters
What will sit on the deck?	Racked stock, people or machines need very different load capacity
How will goods get up?	Stair only, or a goods lift or hoist opening in the deck
Where are the columns allowed?	Column positions must clear forklift aisles and the existing floor
What is the deck surface?	Chequered plate, grating or a board on joists
Is the floor slab strong enough?	Column base plates bring point loads to the existing slab

Every mezzanine has a staircase and edge railings; a spiral staircase is the compact choice when floor space is tight. Structural design for heavy industrial loads may need your own engineer's sign-off, and we work to their drawing.

The gate and the loading bay

Estate roads take trucks, so plot gates are wide and heavy. A MS sliding gate on a ground track suits a wide entrance and can be motorised later; the sliding gate automation guide explains what that involves. At the dock, a rolling shutter closes each opening, and an MS structure with sheeting, built like a car parking shed, covers the loading area so goods stay dry while trucks unload. See rolling shutter manual vs motorised before choosing.

Finish matters more in an industrial estate

Factory steel lives with dust, rain and sometimes process fumes. Bare mild steel rusts quickly. For external gates and sheds, a primer and paint system is the minimum; powder coating or hot-dip galvanising lasts much longer where steel stays wet. We specify the finish in the written quote so it is part of what you approve.

The office at the front

Plant offices are usually a row of cabins facing the shop floor, so managers can see production. Aluminium profile office partitions with doors start at ₹1,100 per sq ft and suit floors that are not perfectly level; frameless cabins start at ₹400 per sq ft. Both use 12mm Saint-Gobain toughened glass, with a 2 year functional warranty on the floor machine. Office windows facing the yard often get aluminium sliding windows with mesh.

Measure on a working day so we see forklift routes and loading times.
Heavy cutting and welding can be scheduled for a weekly off or a shift change.
Tell us about any client audit or compliance dates; installation is planned around them.

The warehouses and factories page covers industrial fit-outs generally, and metal fabrication in Greater Noida lists every metal service. The markets of Gamma and Delta are nearby. Book a site visit to measure the shed.

Near Ecotech, Kasna & Surajpur

Common questions

How is an MS mezzanine floor priced in Ecotech or Kasna?

There is no fixed rate. The price depends on the deck area, the load it must carry, the column layout, the deck surface, and the stairs and railings. We measure the shed and discuss what the deck will hold at the visit, then give a written, all-inclusive quote for the agreed scope.

Can you work on a factory without stopping production?

Usually. Most fabrication is done off site, and installation can be scheduled for a weekly off, a shift change or a quieter period. Welding and cutting inside the shed need a clear zone, so we plan that with your floor manager at the visit.

Factory ke liye sliding gate motor wala lagwa sakte hain?

Yes. A sliding gate can be built ready for a motor and automated now or later. The gate needs a level track, end stops and a suitable gate weight for the motor chosen. Both the gate and the automation are quoted after measuring the entrance.

What finish lasts longest on factory gates and sheds?

For steel that stays wet or sits in an industrial atmosphere, hot-dip galvanising or powder coating over proper surface preparation lasts much longer than paint alone. Primer and enamel paint is the minimum. The finish is written into the quote so you approve it before fabrication.