Warehouses & factories · Gurgaon
Mezzanines, shutters, gates and glass for warehouses and factories in Gurgaon
Factories and warehouses in Gurgaon need steel that works hard: MS mezzanine floors, motorised rolling shutters, sliding gates, loading-bay sheds and glass cabins on the shop floor. FabWise measures, quotes and builds them; metal work is quoted after the visit, glass cabins from the rate card.
Gurugram's industry sits in layers. Udyog Vihar and the Sector 18 and Sector 37 industrial areas are older estates where many factory plots now house garment exporters, light manufacturing, warehouses and offices side by side. IMT Manesar, along NH-48, is the large planned industrial township built around the auto industry and its suppliers. Further out, the Bilaspur, Pataudi Road and Farukhnagar belt near the KMP Expressway has become a warehousing and logistics zone. The fabrication a unit needs depends a lot on which layer it sits in.
The warehouses and factories hub covers industrial fabrication in general. This page is about Gurgaon's industrial layers and what each typically commissions. Other services in the city are on the Gurgaon page.
Older estates: making more of an existing building
In Udyog Vihar and the old industrial sectors, buildings are often decades old and the plot is fixed, so the way to gain space is upwards. An MS mezzanine floor adds a storage or office level inside a high shed, with an MS staircase or straight stair and a railing along the open edge. The structural adequacy of the existing floor and columns for a mezzanine is for the owner's engineer to confirm; we fabricate to the agreed design and loads.
Manesar and the logistics belt: doors, gates and sheds at scale
Newer plants and warehouses in IMT Manesar and the Bilaspur–Farukhnagar belt are larger and designed for trucks. Here the work is at the openings: rolling shutters, often motorised, on loading bays; a heavy MS sliding gate at the truck entry; a steel and sheet shed over the loading apron or two-wheeler parking; and aluminium louvers for ventilation on long walls. These sites sit on the city's outer edge, so share the exact location when booking so the visit can be planned.
| Need | Item | Notes |
|---|---|---|
| More floor area inside a high shed | MS mezzanine floor with stair and railing | Design load agreed with the owner; quoted after visit |
| Secure, fast loading bays | Rolling shutter, manual or motorised | Motorised suits frequent opening; quoted after visit |
| Truck entry | MS sliding gate on a track | Track and foundation checked at the visit |
| Supervisor and QC cabins on the floor | Aluminium profile partition with door | From ₹1,100 / sq ft |
| Front office and reception | Frameless glass partition with door | From ₹400 / sq ft |
Glass cabins on a factory floor
Supervisors want to see the line; QC and stores want a closed room. A glass cabin on the shop floor does both. Aluminium-profile partitions suit dusty, busy floors because the frame protects the glass edges and the gaskets keep some dust and noise out. For the front office, frameless glass gives a cleaner look for visitors. Both use 12mm Saint-Gobain toughened glass, and the office styles carry a 2 year functional warranty on the floor machine.
Steel and Gurgaon's conditions
Industrial steel faces dust, diesel fumes and monsoon water. MS needs primer and paint or powder coating; galvanised members suit areas that stay wet. Our guide on MS gate rust protection covers finishes, and rolling shutter: manual vs motorised helps choose loading-bay doors.
How the job runs
Book a visit for ₹99, adjusted against the final bill and usually arranged within 24–48 hours. We measure, check access for long members and cranes if needed, and aim to send a written all-inclusive quote within about 2 hours, valid for 3 days. Work begins after a 50% advance; toughened glass takes 7–10 days; the balance is due on completion.
See metal fabrication in Gurgaon and facades and shutters in Gurgaon. A stuck rolling shutter or a cracked welding joint can be assessed from photos on WhatsApp first; for new work, book the visit.
Common questions
Do you build MS mezzanine floors for factories in Gurgaon?
Yes. MS mezzanine floors with stairs and edge railings are part of our metal fabrication range. They are quoted after the visit, against a design load agreed with you. The existing floor and columns should be confirmed as suitable by your engineer before we fabricate.
Can you work in IMT Manesar and the Bilaspur warehouse belt?
These sites are on Gurugram's outer edge. Share the exact location when booking, and we confirm the visit and schedule. Large warehouse and plant work there typically covers rolling shutters, sliding gates, sheds and shop-floor cabins, often planned around a shutdown.
Godown ke liye manual shutter ya motor wala?
For a loading bay opened many times a day, a motorised rolling shutter saves time and wear on staff. For a store opened once or twice a day, manual is usually enough. Width, height and wind exposure also matter, so we recommend after measuring.
How much does a glass cabin on a factory floor cost?
Glass cabins follow the rate card: aluminium-profile cabins from ₹1,100 per sq ft and frameless cabins with a door from ₹400 per sq ft. The final figure depends on the measured glass area and doors, given as one all-inclusive quote.
