Industrial sectors · MS & SS Metal Fabrication
Factory Mezzanines, Gates & Stairs in Faridabad's Industrial Sectors
Factory metal fabrication in Faridabad's industrial sectors centres on MS mezzanine floors, wide sliding gates for trucks, access stairs and pedestrian gates. Every job is quoted after a site visit, because the load, the span and the existing floor set the steel section, and the steel section sets the price.
Sector 24, Sectors 58 and 59 near Ballabgarh railway station, and Neharpar's Sectors 66 to 74 hold most of Faridabad's factories. Many are older sheds that have changed hands or products several times, which is why industrial metal fabrication here so often means adapting a building rather than starting fresh: adding a floor inside, widening a gate for bigger trucks, or getting safe access to a roof full of equipment.
The numbers a mezzanine design needs from you
A mezzanine is a structure, not a piece of furniture, and it is designed from a few hard numbers. Without them, any quote is a guess.
- What sits on it: office desks, loose cartons, racked stock or machines. Each is a very different load per square metre.
- The clear height you need below for people, forklifts or racks, and above for staff to stand.
- Where columns may stand without blocking aisles or machines.
- The floor below the columns: an old slab may need new footings.
- How goods get up: a staircase only, or a loading gate in the edge railing.
| Style | Why it suits a Faridabad factory | Rate |
|---|---|---|
| MS mezzanine floor | Doubles storage or office space inside a tall older shed | Quoted after visit |
| MS sliding gate | Wide truck entry without a swing arc across the yard | Quoted after visit |
| MS spiral staircase | Compact access to a roof with tanks, solar panels or chillers | Quoted after visit |
| MS main gate | A separate pedestrian gate so staff do not walk through the truck gate | Quoted after visit |
Decking, edges and stairs
Mezzanine decks are commonly chequered plate, which is tough and simple, or grating where light and air should pass. Edges need a railing with a toe board so nothing rolls off. A stair that flexes or rings underfoot usually has loose base bolts or too few stringer supports; metal staircase wobbling explains the fix. A straight stair is safer for carrying goods; a spiral saves floor area where only people climb.
Gates sized for today's trucks
Factory gates in older sectors were often sized for smaller vehicles. A new sliding gate needs a clear run along the boundary as long as the opening, a level track on a proper foundation, and a guide at the top so wind does not push it. Grit and scrap in the track is the main reason they jam; sliding gate stuck covers what to check daily.
Protecting steel in industrial air
Fumes, dust and outdoor exposure attack mild steel. Inside a dry shed, a good primer and paint system is usually enough; for gates and outdoor stairs, hot-dip galvanising or galvanising plus paint gives far longer life. The finish is written into the quote.
The visit costs ₹99, is usually arranged within 24 to 48 hours, and the fee is adjusted against the final bill. We measure the shed, check the floor and the boundary, and aim to send the written all-inclusive quote within about 2 hours; it is valid for 3 days. Fabrication starts on a 50% advance, mostly off site, so on-site welding and fixing can be fitted into a shift change or a weekly off. The balance is due on completion.
The MS gate price guide explains gate pricing; for shutters and glass cabins in the same plants, see the industrial sectors page and warehouses and factories. City-wide, see metal fabrication in Faridabad and the metal fabrication catalogue. Workshops at the edge of Ballabgarh need the same gates at a smaller scale. Book a visit with the load figures to hand.
Common questions
How long does it take to build a factory mezzanine in Faridabad?
It depends on the size, the load and whether footings are needed. Most steel is cut and welded off site after the 50% advance, which keeps on-site time short. The schedule is set in the written quote once the design is fixed. Erection is planned around your production hours.
Can a mezzanine sit on the existing factory floor?
Sometimes. If the floor slab is thick and sound enough for the column loads, base plates can be anchored directly. Older or thin floors may need new footings under each column. We check the slab at the visit and say which applies before quoting.
Truck ke liye gate kitna chauda hona chahiye?
Wide enough for your largest vehicle to turn in from the road without clipping the posts, which is usually more than its body width. We look at the road, the turning space inside and the vehicles you use, then size the opening. A sliding gate then needs the same length of clear wall beside it.
Services on this page
Every metal fabrication style
- MS main gateA swing gate in mild steel for a house, builder floor or farmhouse, made to the opening and finished against rust.
- Sliding gateA gate that runs sideways on a track, for a driveway too short for a gate to swing. Motor-ready if you want one later.
- Window safety grillFixed or openable steel grills for windows and balconies, made to each opening.
- Steel safety doorA steel grill door in front of the main door, so it can stand open for air without standing open to the corridor.
- Metal staircaseSpiral or straight steel stairs to a terrace, mezzanine or loft, fabricated to the floor-to-floor height.
- Steel mezzanine floorA steel-framed extra floor inside a shop, warehouse or high-ceiling office, for storage or desks.
- All metal fabrication
More in Faridabad industrial sectors
Nearby, and common problems
- MS Gates, Grills & Safety Doors in Ballabgarh, Faridabad
- Window Grills, Safety Doors & Spiral Stairs in NIT Faridabad
- Iron gate or window grill is rusting and the paint is flaking
- Sliding gate is stuck, jerky or hard to push along its track
- Main gate has sagged and drags on the floor when opened
- Main gate lock or latch won't engage, or the key won't turn