Sushant Lok · MS & SS Metal Fabrication
MS Safety Doors, Grills & Gates in Sushant Lok, Gurgaon
In Sushant Lok, metal work is about securing floors that are let separately: an MS safety door for each unit, grills on lower floors and a lockable gate at the stair entry. Each is fabricated to the opening and quoted in writing after a ₹99 site visit.
Metal fabrication in Sushant Lok Phase 1, Gurgaon, is driven by who lives there. Blocks A, B and C of Ansal's colony in Sector 43 sit a short walk from Millennium City Centre metro, and many of the builder floors are let to working professionals, students and small offices, or run as paying-guest houses. When one building holds four separate households and a stream of visitors, every door, window and entrance needs its own lock. That is the everyday steel work of this central Gurugram neighbourhood.
One building, several locks
A typical Sushant Lok builder floor has a shared ground-floor entrance, a common stair and one flat per floor. Landlords converting floors for tenants usually ask for three layers.
| Style | Why it suits Sushant Lok | Price |
|---|---|---|
| MS safety door | Gives each let floor its own steel door and lock in front of the wooden door | Quoted after visit |
| MS window grill | Ground and first-floor windows on narrow lanes, close to the next building | Quoted after visit |
| MS main gate | A lockable gate at the shared stair entry, separate from the stilt | Quoted after visit |
A safety door is only as strong as its fixing
The walls around door openings in older Sushant Lok buildings often have thick plaster over brick, and plaster crumbles under a crowbar. A safety door frame should be anchored through the plaster into sound masonry or the RCC column, with fixings on both sides. The lock should be a type that can be serviced and re-keyed when a tenant leaves. A door that rattles in its frame has loose fixings or worn hinges; safety door rattling covers the fixes. Mild steel is strong and easy to weld, but it rusts, so a door facing an open stair needs powder coating or a good primer and enamel.
Grills, light and escape
With buildings a few metres apart, a grill is often the only barrier between a ground-floor bedroom and the lane. But a fully fixed grill on every window traps people in a fire. Keep at least one openable grill per floor, with a lock that opens from inside without a key hunt. For a PG house, where several people share a floor, that escape route matters even more. The window grill designs and safety guide shows patterns that are secure without feeling like a cage.
The stair-entry gate
A gate at the bottom of the common stair keeps visitors out of the building without restricting the stilt parking. Every owner and tenant needs a key or code, so agree the lock with everyone first. Gate lock not working explains why shared locks stiffen after a monsoon.
Narrow lanes and installation day
Lanes in Blocks A and B are tight and parking is scarce, so steel arrives in a small vehicle and is carried in. A safety door frame travels flat and fits most stairs. Tell us the floor and the lane when you book.
The ₹99 visit is usually within 24 to 48 hours. The written quote follows within about 2 hours, valid for 3 days, and fabrication starts on the 50% advance. Fitting a safety door or a set of grills on site usually takes a few hours once the steel is made.
The MS gate price guide explains what moves the cost of gates and doors. Browse all metal fabrication styles or metal fabrication in Gurgaon, and see the Sushant Lok page for the area. The bigger plots of the DLF Phases next door have heavier gates and wider drives.
Common questions
How much does an MS safety door cost in Sushant Lok?
Safety doors have no fixed published rate. The size, steel section, infill design, lock and finish all change the price. After the ₹99 site visit you get a written, all-inclusive quote within about 2 hours, valid for 3 days. Fabrication starts on a 50% advance.
PG ke liye grill lagwani hai, kya dhyan rakhein?
Keep at least one openable grill per floor with a lock that opens from inside, so residents can get out in an emergency. Avoid flat ledges that hold rainwater, and anchor the grill into the wall properly. Grills are quoted after the site visit once each window is measured.
Can a safety door be fitted to an old plastered wall?
Yes, but the frame must be fixed through the plaster into the brick or the RCC column behind it. Plaster alone crumbles under force. We check the wall at the site visit and plan the fixing points before the door is fabricated.
Who decides on a gate at the common stair of a builder floor?
All the owners, in practice, since the stair and entrance are shared. Agree the design, the lock type and how keys are shared before ordering. The gate is designed to the opening and quoted after the site visit.
Services on this page
Every metal fabrication style
- MS main gateA swing gate in mild steel for a house, builder floor or farmhouse, made to the opening and finished against rust.
- Sliding gateA gate that runs sideways on a track, for a driveway too short for a gate to swing. Motor-ready if you want one later.
- Window safety grillFixed or openable steel grills for windows and balconies, made to each opening.
- Steel safety doorA steel grill door in front of the main door, so it can stand open for air without standing open to the corridor.
- Metal staircaseSpiral or straight steel stairs to a terrace, mezzanine or loft, fabricated to the floor-to-floor height.
- Steel mezzanine floorA steel-framed extra floor inside a shop, warehouse or high-ceiling office, for storage or desks.
- All metal fabrication