Sainik Colony · MS & SS Metal Fabrication
MS Gates, Grills & Safety Doors in Sainik Colony, Faridabad
Metal fabrication in Sainik Colony is usually a frontage upgrade: a new MS gate, matching window grills and a safety door, often done in phases. Each item is quoted after a ₹99 site visit; fixing the pattern and finish at the start lets later phases match.
Sainik Colony in Sector 49 is a colony of independent houses off the Badkhal–Pali road, settled largely by ex-servicemen's families. Many houses are being taken over by a second generation, who want the home secure and tidy without rebuilding it. Gates, grills and safety doors in Sainik Colony are therefore rarely one order. They are a plan carried out over months, sometimes years, as budget allows.
A phased plan for one frontage
Doing everything at once is cheapest per item, but most owners spread it. If you do, sequence it so the most exposed item comes first and the design is fixed on day one.
- Phase one: the main gate, because it is the first line of security and the most visible change.
- Phase two: the safety door on the main entrance, matched to the gate's pattern.
- Phase three: ground-floor window grills, with at least one openable from inside.
- Phase four: upper-floor grills and any terrace or staircase work.
| Style | Why it suits a Sainik Colony house | Rate |
|---|---|---|
| MS main gate | Swing gate for plots with room inside; the pattern sets the look for the whole frontage | Quoted after visit |
| MS sliding gate | Where the plot slopes or a car is parked just inside the gate | Quoted after visit |
| MS window grill | Replaces mismatched grills from different decades with one design | Quoted after visit |
| MS safety door | A lockable steel outer leaf so the main door can stay open for air | Quoted after visit |
Choosing a finish you can repeat later
If phase four comes two years after phase one, the colour must still match. Hand-mixed enamel is hard to repeat exactly; a standard powder coat shade can be ordered again by its code. Powder coating also holds up better at welds, where rust usually starts; powder coating explains the process. Whatever the finish, ask for the shade and system to be written into the quote.
Signs in an older house that need fixing first
Rust running down the wall below a grill means water is sitting in the frame or the anchors are corroding inside the plaster; rust stains on wall explains the cause. A crack at a weld on an old gate is a sign of fatigue, not just bad paint, covered under welding joint cracked. Both are worth sorting before new metal goes up nearby, so the new work does not inherit the old damage.
Before the visit
- Photograph every grill and the gate, so we can see what is being replaced and what might stay.
- Decide which windows need to open from inside.
- Think about mesh behind the grills, so handles and frames do not clash.
- If the gate drags, note whether it is worse in the monsoon, which hints at a post or footing problem.
Booking the visit costs ₹99; it is usually arranged within 24 to 48 hours, and the fee comes off the final bill. We measure every opening you want priced, even the ones planned for later, so the whole frontage is drawn once. The written quote, aimed within about 2 hours and valid for 3 days, lists each item separately. Each phase starts on a 50% advance and the remaining half is due when that phase is fixed.
The main gate design guide shows common patterns, and the MS gate price guide explains what moves the cost. For windows and sheds in the same houses, see the Sainik Colony page. City-wide, see metal fabrication in Faridabad and the metal fabrication catalogue. Owners in NIT Faridabad face tighter lanes with the same steel. Book a visit and we will draw the frontage once.
Common questions
Can I order the gate now and the grills next year in Sainik Colony?
Yes. We record the design, bar section and finish in the first quote, so the grills can match later. Prices may change by then, so the later phase gets its own quote, but the design stays the same. Powder coating makes the colour easier to repeat than enamel.
Why do old grills leave rust stains on the wall?
Water gets into hollow sections or sits at the bottom bar, and the anchors inside the plaster corrode. The rust then bleeds down the wall. New grills should drain, be primed properly and have their anchors sealed. Old stains may need the plaster treated before repainting.
Purane ghar ka gate sliding karwa sakte hain?
Often, yes, if there is a clear wall run beside the opening at least as long as the gate and room for a level track. Sliding gates suit plots where a swing leaf would scrape on a rising driveway. We check the run and the ground at the visit and tell you if it works.
Services on this page
Every metal fabrication style
- MS main gateA swing gate in mild steel for a house, builder floor or farmhouse, made to the opening and finished against rust.
- Sliding gateA gate that runs sideways on a track, for a driveway too short for a gate to swing. Motor-ready if you want one later.
- Window safety grillFixed or openable steel grills for windows and balconies, made to each opening.
- Steel safety doorA steel grill door in front of the main door, so it can stand open for air without standing open to the corridor.
- Metal staircaseSpiral or straight steel stairs to a terrace, mezzanine or loft, fabricated to the floor-to-floor height.
- Steel mezzanine floorA steel-framed extra floor inside a shop, warehouse or high-ceiling office, for storage or desks.
- All metal fabrication
More in Sainik Colony
Nearby, and common problems
- Kothi Gates, Safety Doors & Stairs in Sectors 14 to 17, Faridabad
- Window Grills, Safety Doors & Spiral Stairs in NIT Faridabad
- Iron gate or window grill is rusting and the paint is flaking
- Sliding gate is stuck, jerky or hard to push along its track
- Main gate has sagged and drags on the floor when opened
- Main gate lock or latch won't engage, or the key won't turn