Site visit within 24–48 hours in Delhi NCRHow it works

Malibu Towne · Sector 47 · Gurgaon

Gates, Terrace Sheds & Railings in Malibu Towne, Gurgaon

Malibu Towne is a gated plotted colony off Sohna Road, launched in the 1990s, where original houses sit beside newer builder floors. Its ageing gates, grills and railings, and its roof terraces, make metal work the main business: new MS gates, terrace sheds, pergolas and SS railings, all quoted after a ₹99 site visit.

Updated Malibu Towne, Gurgaon

Mild steel sliding gate running on a bottom track across a house driveway

Malibu Towne is a large gated colony in Sector 47, off Sohna Road, with wide internal roads, parks and a mix of independent houses, builder floors and a few apartment blocks. It was launched in the 1990s, early in Gurugram's private-colony boom, and planned around plots, which gives it a settled, low-rise feel next to the towers of Sohna Road. Golf Course Extension Road and the city centre are a short drive away. For gates, sheds and railings in Malibu Towne, Gurgaon, the age of the colony is what matters: much of the original metal work is now some decades old.

Gates that have done their time

A house from the colony's early years usually still has its first main gate, and it shows: hinges worn, the leaf dropped so it scrapes the drive, rust at the bottom rail where rainwater sits. These are common reasons people call. Sometimes the gate can be rehung and its hinges replaced; often the frame has rusted through and a new MS main gate is the better spend. See gate sagging and dragging and gate hinge broken.

Choosing a new gate for a Malibu Towne house
Gate typeGood forWhat to plan
Swing MS main gateWide drives with room to swingHeavy-duty hinges and a stop so it does not drop
MS sliding gateWhere a car parks right behind the gateA clear run along the boundary wall and a clean track
Sliding gate ready for a motorOwners planning automation laterA strong frame and a level track from the start

Our main gate design guide and sliding gate automation guide cover the choices, and the MS gate price guide explains what drives the cost. Whatever the design, ask how it will be protected: MS gate rust protection is the difference between a gate that lasts and one that needs replacing again.

Builder floors bring roof and balcony work

As original houses are rebuilt as floors, the roof often passes to the top-floor owner, and a polycarbonate terrace shed or an MS pergola is one of the first things they add. Balconies on new floors need railings: SS balcony railing is the common choice, and SS304 holds up far better than cheaper grades in the open. On older houses, a railing that wobbles is usually loose at its anchors rather than broken.

Colony rules and practicalities

  • Entry. Workers and vehicles come in through the colony gate; the security desk usually wants the owner's confirmation.
  • Wide roads. A delivery vehicle can reach most plots, which makes long gates and shed sections easier to bring in than in older sectors.
  • Facade sense. Gated colonies tend to care how frontages look; a gate design in keeping with the street avoids friction with neighbours.
  • Trees. Leafy streets mean leaves on shed roofs and in gutters; a shed gutter overflowing is usually a cleaning problem first.

Bathrooms in rebuilt floors get frameless glass, with a frameless shower partition with door from ₹500 per sq ft. For the wider area, see Sohna Road and MS and SS metal fabrication in Gurgaon. Book a site visit and we will look at the gate, the grills and the roof together.

Near Malibu Towne

Common questions

How much does a new main gate cost in Malibu Towne, Gurgaon?

MS gates have no fixed published rate. The price depends on the width and height, the steel sections, the design infill, swing or sliding, and the finish. It is quoted in writing after the ₹99 site visit, all-inclusive for the agreed scope and valid for 3 days.

Our old gate scrapes the ground. Repair or replace?

If the frame is straight and free of deep rust, new hinges and rehanging often fix it. If the bottom rail or posts have rusted through, or the frame has twisted, a new gate is the better spend. Send a photo or video on WhatsApp so we can judge before you book a visit.

Can a new sliding gate be automated later?

Yes, if it is built for it: a rigid frame, a level, clean track and room for the motor and rack at one end. Planning that from the start costs little extra and saves rebuilding. Tell us at the visit if automation is likely.

Gate par rust dobara na aaye, uske liye kya karein?

Ask for proper surface preparation, a rust-inhibiting primer and good paint, or a powder-coated finish, and touch up scratches early. Make sure water can drain off the bottom rail. Most rust starts at joints and the bottom of the gate where water sits.

Site visit ₹199₹99Adjusted in the final bill

Book site visit

515 site visits requested

Support