IMT Manesar · Gurugram district

Factory Fabrication in IMT Manesar: Mezzanines, Shutters, Sheds & Cabins

IMT Manesar is Gurugram's big industrial township, built around auto and component plants, so the work is factory work: MS mezzanine floors, rolling shutters at loading bays, sheds over open yards, wide sliding gates and cabins on the shop floor. Metal and shutter work is quoted after a ₹99 site visit.

Updated 8 October 2026IMT Manesar, Gurgaon

Galvanised steel rolling shutter closing a loading bay opening

Manesar is a town and municipal corporation in Gurugram district, best known for its Industrial Model Township (IMT), developed by the state's industrial corporation, HSIIDC, along NH-48. The township is dominated by automobile and auto-component manufacturing, with Maruti Suzuki's second plant and many suppliers, alongside other light industry, warehousing and some office campuses. For mezzanines, shutters and sheds in IMT Manesar, the buildings are big, the floors are working floors, and every job is planned around production.

What factories here usually need

Common fabrication work in IMT Manesar plants
Need	Fabrication	What decides the design
More storage or office space under a high roof	MS mezzanine floor with stairs and edge railing	The load it carries, column spacing, the floor slab
Secure loading bays and stores	Rolling shutter, manual or motorised	Opening size, how often it runs, wind exposure
Covered yards, parking or scrap areas	MS shed, car parking shed structures	Span, roof sheet, drainage
Vehicle entry at the plot boundary	MS sliding gate	Width, truck traffic, track condition
Supervisors' or QC rooms on the shop floor	Aluminium profile office partition with door	Dust, noise, need to see the line

Mezzanines are structural work

A mezzanine is not a shelf. Its steel sections, column positions, base plates and bracing are designed for what will sit on it: racked components, a canteen, or desks and people. Tell us the use at the visit, along with any forklift routes and crane or conveyor clearances below. It also needs a proper staircase railing and edge protection. Check with your plant's compliance team too, since a mezzanine can change how a floor is classified. Our warehouses and factories page for Gurgaon covers more of this kind of work.

Shutters and gates that run all shift

A shutter that opens dozens of times a shift wears its springs, guides and slats far faster than a shop shutter. Choosing between manual and motorised depends on size and frequency; our manual vs motorised rolling shutter guide covers the trade-off. When one sticks or grinds, see rolling shutter stuck and shutter noisy. Boundary sliding gates take truck traffic and dust; a sliding gate that sticks usually has a fouled track or a failed wheel.

Cabins on a production floor

A supervisor's cabin or a quality room on the line needs to keep out some noise and dust while keeping the line in view. An aluminium profile partition, from ₹1,100 per sq ft, is robust and easy to reconfigure when the line layout changes; frameless glass, from ₹400 per sq ft, suits the admin block. Glass uses 12mm Saint-Gobain toughened glass.

Working inside a running plant

Safety induction and gate passes are normal; share the plant's requirements when you book.
Hot work permits apply to welding inside the building; much fabrication is done off-site and bolted together on site to reduce it.
Shutdown windows. Work over a running line is usually planned for a weekend or shift break.
PPE and escorts follow your plant's rules.

Manesar is within Gurugram district; if your site is further along NH-48, ask on WhatsApp whether it can be taken up. See also MS and SS metal fabrication in Gurgaon, facades and shutters in Gurgaon and Udyog Vihar. Book a site visit and we will walk the plant with your team.

Near IMT Manesar

Common questions

Do you take up factory fabrication work in IMT Manesar?

Yes. Manesar is in Gurugram district, and mezzanines, shutters, sheds, gates and shop-floor cabins are all part of what FabWise does. A ₹99 site visit gets the site measured; the written quote follows, all-inclusive for the agreed scope. For sites beyond Manesar, ask on WhatsApp.

How much does an MS mezzanine floor cost in Manesar?

There is no fixed published rate, because the load, span, column spacing and finish change the steel quantity a lot. It is quoted in writing after the site visit, once we know what the floor will carry and how it is reached. The quote is valid for 3 days.

Can the work be done without stopping production?

Mostly. Much of the fabrication is done off-site, and installation can be planned around shift breaks or a weekend shutdown. Work directly over a running line, or welding inside the building, usually needs a planned window and your plant's permits.

Loading bay ka shutter baar baar atak jaata hai, kya karein?

Usually the guides are bent, the slats are damaged, or the spring or motor is tired from heavy use. Send a video on WhatsApp so we can see it running. A repair may be enough; a shutter that is badly damaged or undersized for the use is better replaced, quoted after a visit.