Gates, Grills, Shutters and Sheds in Kherki Daula, Gurgaon

Kherki Daula is a village on National Highway 48, best known to anyone who drives between Gurgaon and Manesar for the toll plaza that bears its name, the second on the highway after leaving Delhi. The Dwarka Expressway, also called the Northern Peripheral Road, ends here at NH-48, so the village sits on one of the busiest junctions in the district. On the city's sector plan it falls in Sector 84, with the Vatika township close by. Along the highway are factories, among them Haldiram's plant, with a Suzuki Motorcycle plant on the outskirts. Searches call it Kherki Daula, Gurgaon or Kherki Daula, Gurugram; both are this place.

• PIN code: 122004.
• Roads: NH-48 (Delhi–Jaipur highway) and the southern end of the Dwarka Expressway.
• Landmark: the Kherki Daula toll plaza on NH-48.
• Mix: village houses, highway-side shops and godowns, and factories along the road.

Who makes gates and grills in Kherki Daula, Gurgaon?

FabWise makes and fits gates, grills, safety doors, shutters and sheds across Kherki Daula, from a single window grill to a sliding gate for a factory boundary. Metal work has no fixed rate, because size, section and design change the cost, so everything is measured at a ₹99 site visit and quoted in writing. The written quote covers the agreed scope and arrives within about two hours of the visit.

Three kinds of building in one village

The village houses

Much of the village's farmland has gone to the new sectors around it. Village houses on Gurugram's edge are commonly built up floor by floor, with rooms or whole floors let to people who work nearby, and that brings a steady list: an MS main gate for the frontage, MS window grills on every street-facing floor, an MS safety door for each let floor, and a separate stair so tenants do not pass through the family's home. Grill designs that still let a room be escaped from in an emergency are in window grill designs for safety.

The highway frontage

Shops, eateries and godowns face NH-48 and its service road, with constant traffic and dust. A rolling shutter is the basic need; a shop that wants passing customers to see in adds a toughened glass shop front with door behind it, from ₹500 per sq ft. A shutter that sticks after a dusty season usually has dirty or bent guides; see rolling shutter stuck.

Factories and godowns

Units along the highway need wide MS sliding gates that trucks can pass, covered yards and loading areas, and sometimes a mezzanine floor to add storage under a high roof. These are measured with the unit's manager, and the gate track, slab and roof span are checked before anything is quoted.

Steel that lives beside a highway

Mild steel rusts from its joints and lower edges first, and the dust and rain here speed that up. A gate or shutter that is properly primed and powder coated, or galvanised where it sits low, lasts years longer than one with a single coat of paint. A gate that has started to drop and drag is often worn hinges or a sagging frame; gate sagging or dragging shows what to look for. For an outdoor finish chosen to last, MS gate rust protection covers the options.

Roofs and covered space

A flat roof on a village house becomes usable with a polycarbonate terrace shed, and a courtyard or yard can be covered with an MS frame and sheet roof. Both are planned for the open ground's wind as well as rain, with anchoring into the slab or columns rather than the parapet.

How a job runs

Book the ₹99 site visit, which is generally arranged within 24–48 hours and adjusted against the bill if you go ahead. The written quote is valid for 3 days. Fabrication starts on a 50% advance, and the balance is paid on completion after installation. Repairs to existing glass, such as a cracked shop door panel, are quoted from a photo on WhatsApp.

The new towers of New Gurgaon, Sectors 82 to 95 surround the village, Sector 102 is up the Dwarka Expressway, and factory-scale work further along NH-48 is on IMT Manesar. Every gate, grill and door we make is on metal fabrication in Gurgaon, and the MS gate price guide explains what sets the cost.